Features of Ni-W Plating Film Obtained by the Jet-Flow System
AppliedChem · 2021
DOI: 10.3390/appliedchem1010004 ↗Kurz gefasst
Fachartikel in der Zeitschrift AppliedChem, 2021. Verfasst von Yuka Tsuruta und 4 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Chromium plating has excellent corrosion resistance and is widely used in industry. However, it also has a high environmental load. As an alternative, electric Ni-W plating is attracting attention. However, it is not widely used because the stress is high and the film is prone to cracks. Furthermore, although it is necessary to thicken the film to improve the corrosion resistance, there are also problems that the current efficiency is low and the plating time is long. Therefore, we investigate a film with high corrosion resistance by using the jet-flow plating method that enables plating at a high current density. Our results show that the jet-flow plating enables plating of 50 µm, and high corrosion resistance is obtained by randomly generating fine cracks in the film at 20 A·dm−2. We also found that the stress changed depending on the current density and shape of the crack also changed.
Zitieren
APA
Tsuruta, Y., Umeda, Y., Honma, H., Takai, O., & Tashiro, K. (2021). Features of Ni-W Plating Film Obtained by the Jet-Flow System. AppliedChem. https://doi.org/10.3390/appliedchem1010004
Vancouver
Tsuruta Y, Umeda Y, Honma H, Takai O, Tashiro K. Features of Ni-W Plating Film Obtained by the Jet-Flow System. AppliedChem. 2021. doi:10.3390/appliedchem1010004
BibTeX
@article{Tsuruta2021,
author = {Tsuruta, Yuka and Umeda, Yasushi and Honma, Hideo and Takai, Osamu and Tashiro, Katsuhiko},
title = {Features of Ni-W Plating Film Obtained by the Jet-Flow System},
journal = {AppliedChem},
year = {2021},
doi = {10.3390/appliedchem1010004}
}
EUVIMED