The Structure and Properties of Tungsten Heavy for Special Applications
Applied Sciences · 20.11.2026 · 16 (22) · 11515
DOI: 10.3390/app162211515 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 20.11.2026. Verfasst von Daniel Szypuła und 2 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This article presents the results of research on tungsten heavy alloys (THA) for special applications. Four W-Ni-Fe alloys were prepared for the study: three containing additions of graphite powder, carbon black, or tungsten trioxide (desig. THA-G, THA-C, and THA-T, respectively) and a reference alloy without additives (desig. THA). Rod-shaped samples were produced via liquid-phase sintering (LPS) in a hydrogen atmosphere. Powder particle size distribution was assessed using a Malvern instrument, and morphology was observed via scanning electron microscopy (SEM). Density, tensile strength, and Vickers hardness were determined for all three alloys. The density of all sintered samples was similar, ranging from 18.64 to 18.71 g/cm3, a value close to the theoretical density. The reference alloy exhibits plastic behavior during tensile testing, with a tensile strength of 750 MPa. Alloys containing graphite, carbon black, or tungsten trioxide exhibit brittle behavior during tensile testing, with tensile strengths ranging from 535 ± 36 to 601 ± 43 MPa. The microstructures of the modified THA materials are similar, consisting of equiaxed, chemically pure tungsten grains, a matrix, and voids. Voids distributed throughout the microstructure—without forming clusters—occur primarily at grain-matrix interfaces and at tungsten grain contact points. The appropriate selection of elements (W, Ni, Fe) and the right amount of additives (graphite powder, carbon black, WO3) make it possible to reduce the alloy’s strength to the desired level and impart brittle properties while maintaining the target density.
Zitieren
APA
Szypuła, D., Skoczylas, P., & Sitek, R. (2026). The Structure and Properties of Tungsten Heavy for Special Applications. Applied Sciences, 16(22), 11515. https://doi.org/10.3390/app162211515
Vancouver
Szypuła D, Skoczylas P, Sitek R. The Structure and Properties of Tungsten Heavy for Special Applications. Applied Sciences. 2026;16(22):11515. doi:10.3390/app162211515
BibTeX
@article{Szypua2026,
author = {Szypuła, Daniel and Skoczylas, Paweł and Sitek, Ryszard},
title = {The Structure and Properties of Tungsten Heavy for Special Applications},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {22},
pages = {11515},
doi = {10.3390/app162211515}
}
EUVIMED