EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Infill Pattern Selection for Topology-Optimised FDM Beams: The Limits of Homogenised Finite-Element Screening

Abdulrahman Ahmed Alymani, Libish Murugesan, Yara Moeid Al Enezi

Applied Sciences · 19.11.2026 · 16 (22) · 11482

DOI: 10.3390/app162211482 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 19.11.2026. Verfasst von Abdulrahman Ahmed Alymani und 2 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research, Development, and Innovation Authority (RDIA) of the Kingdom of Saudi Arabia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Infill patterns for load-bearing printed parts are often chosen with little evidence, and a homogenised finite-element model calibrated from the slicer toolpath is the natural screening tool. We measured where such a model stops being reliable, using a topology-optimised Messerschmitt–Bölkow–Blohm beam with cubic, gyroid and honeycomb infill at two densities. The reference is a road-resolved model of every deposited toolpath; no beam was tested mechanically. Three limits appear. First, inputs: skipping arc moves without updating the position inflates the gyroid orientation input in all four slicers tested, and the nominal density setting hides almost all of the pattern difference. Second, the core law: a scalar density law falls 8 to 20% below the reference and loses the difference between cubic and gyroid, while a homogenised tensor removes this error. Third, resolution: with a tensor core and dense material of the correct thickness, stiffness agrees with the reference within 5 to 7%, yet cubic and honeycomb cannot be separated. Omitting the solid layers about halves the stiffness. Weaker bonding between layers keeps the pattern order. These results apply to one beam and to linear elasticity. The data and code are openly available.

Förderung

  • Research, Development, and Innovation Authority (RDIA) of the Kingdom of Saudi Arabia

Zitieren

APA

Alymani, A. A., Murugesan, L., & Enezi, Y. M. A. (2026). Infill Pattern Selection for Topology-Optimised FDM Beams: The Limits of Homogenised Finite-Element Screening. Applied Sciences, 16(22), 11482. https://doi.org/10.3390/app162211482

Vancouver

Alymani AA, Murugesan L, Enezi YMA. Infill Pattern Selection for Topology-Optimised FDM Beams: The Limits of Homogenised Finite-Element Screening. Applied Sciences. 2026;16(22):11482. doi:10.3390/app162211482

BibTeX
@article{Alymani2026,
  author = {Alymani, Abdulrahman Ahmed and Murugesan, Libish and Enezi, Yara Moeid Al},
  title = {Infill Pattern Selection for Topology-Optimised FDM Beams: The Limits of Homogenised Finite-Element Screening},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {11482},
  doi = {10.3390/app162211482}
}
Kostenlos starten →