EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surrogate Model-Assisted and Load-Dependent Optimization of Prismatic LFP Battery Module Cooling

Gayeon Kim, Jiye An, Taegyeol Lee, Seongjae Won, Jinwook Lee

Applied Sciences · 18.11.2026 · 16 (22) · 11426

DOI: 10.3390/app162211426 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 18.11.2026. Verfasst von Gayeon Kim und 4 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Energy Technology Evaluation and Planning.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the offline selection of coolant flow rate and inlet temperature for a fixed eight-cell, 50 Ah prismatic lithium iron phosphate battery module under different loads. A dataset of 100 steady-state CFD cases was used to predict maximum battery temperature, inter-cell temperature difference, and cold-plate pressure drop. Response surface methodology, XGBoost, and Kriging were compared using five-fold cross-validation on 80 training cases and prediction errors on 20 separately generated cases. Kriging achieved the lowest errors for all three responses. The response-specific Kriging models were refitted using all 100 cases and coupled with NSGA-II to generate approximate Pareto candidates at eight loads from 0.5 to 4.0 C. After screening for maximum temperature ≤ 40 °C and inter-cell temperature difference ≤ 5 K, the candidate with the lowest predicted pressure drop was selected at each load. The selected flow rates ranged from 1.000 to 1.008 L/min/plate, with load-specific inlet temperatures. Additional CFD simulations confirmed that all eight combinations met both adopted thermal targets under the original CFD model. Prediction of all three responses required 2.486 ± 0.788 ms per condition, supporting repeated evaluation of operating alternatives.

Förderung

  • Korea Institute of Energy Technology Evaluation and Planning

Zitieren

APA

Kim, G., An, J., Lee, T., Won, S., & Lee, J. (2026). Surrogate Model-Assisted and Load-Dependent Optimization of Prismatic LFP Battery Module Cooling. Applied Sciences, 16(22), 11426. https://doi.org/10.3390/app162211426

Vancouver

Kim G, An J, Lee T, Won S, Lee J. Surrogate Model-Assisted and Load-Dependent Optimization of Prismatic LFP Battery Module Cooling. Applied Sciences. 2026;16(22):11426. doi:10.3390/app162211426

BibTeX
@article{Kim2026,
  author = {Kim, Gayeon and An, Jiye and Lee, Taegyeol and Won, Seongjae and Lee, Jinwook},
  title = {Surrogate Model-Assisted and Load-Dependent Optimization of Prismatic LFP Battery Module Cooling},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {11426},
  doi = {10.3390/app162211426}
}
Kostenlos starten →