Thermal Performance of a New Latent Thermal Energy Storage Based on Macro-Encapsulated Phase Change Material Modules During the Discharging Process
Applied Sciences · 18.11.2026 · 16 (22) · 11407
DOI: 10.3390/app162211407 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 18.11.2026. Verfasst von Gabriella Adele D’Errico und 3 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Emilia-Romagna Regional Development Fund.
Abstract (Originalsprache)
Thermal Energy Storage (TES) systems represent a promising technology for building climatization, allowing the smoothing of peak loads and the improvement of renewable energy use. This study experimentally investigates the thermal performance of a Latent Thermal Energy Storage (LTES) system based on water and macro-encapsulated Phase Change Material (PCM) modules, filling about 30% of the storage volume. A comparative analysis with an equivalent sensible TES is carried out to quantify the performance enhancement associated with latent heat exploitation. Experimental tests are performed under different Heat Transfer Fluid (HTF) operating conditions (mass flow rate and inlet temperature) during the system discharging process. The results show that the energy density improves by up to 88% compared to a traditional TES. On the other hand, a significant decrease in the average heat transfer rate is observed due to the PCM low thermal conductivity. However, this penalty can be limited to below 15% for low HTF flow rates. The discharging performance of the LTES system is strongly influenced by the HTF operating conditions: increasing the HTF mass flow rate from 30 to 180 kg/h reduces the discharging time by up to 70%, while the lower HTF inlet temperature reduces the discharging time by up to 8%.
Förderung
- Emilia-Romagna Regional Development Fund
Zitieren
APA
D’Errico, G. A., Dongellini, M., Naldi, C., & Morini, G. L. (2026). Thermal Performance of a New Latent Thermal Energy Storage Based on Macro-Encapsulated Phase Change Material Modules During the Discharging Process. Applied Sciences, 16(22), 11407. https://doi.org/10.3390/app162211407
Vancouver
D’Errico GA, Dongellini M, Naldi C, Morini GL. Thermal Performance of a New Latent Thermal Energy Storage Based on Macro-Encapsulated Phase Change Material Modules During the Discharging Process. Applied Sciences. 2026;16(22):11407. doi:10.3390/app162211407
BibTeX
@article{DErrico2026,
author = {D’Errico, Gabriella Adele and Dongellini, Matteo and Naldi, Claudia and Morini, Gian Luca},
title = {Thermal Performance of a New Latent Thermal Energy Storage Based on Macro-Encapsulated Phase Change Material Modules During the Discharging Process},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {22},
pages = {11407},
doi = {10.3390/app162211407}
}
EUVIMED