Structural Parameter Optimization and Motion Planning of a Hydraulic Swing Mechanism for a Ground-Mobile Photovoltaic Panel Cleaning Robot
Applied Sciences · 17.11.2026 · 16 (22) · 11389
DOI: 10.3390/app162211389 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 17.11.2026. Verfasst von Ru Kang und 6 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Gansu Provincial Youth Science and Technology Fund, Gansu Provincial Key Talent Program.
Abstract (Originalsprache)
Hydraulic swing mechanisms for ground-mobile photovoltaic (PV) cleaning robots must balance working swing range against actuator force while accounting for motion-dependent loading. This study integrates structural parameter selection, cycloidal trajectory planning, and actuator load prediction within a unified kinematic, static, and dynamic model. Discrete wire-rope attachment positions are screened by direct enumeration. A compromise design is selected using Pareto analysis and a weighted ideal-point method, with the influence of the objective weights assessed through sensitivity analysis. With the reference weights, the selected attachment position of 0.78 m provides a working swing range of 37.39° and a peak static cylinder force of 4.181 kN. A cycloidal trajectory is mapped from main-arm rotation to cylinder motion and evaluated for durations of 3, 6, and 12 s. Shorter motion durations increase inertial loading, while gravity remains the dominant load component. For the 6 s motion, the predicted peak driving force and peak absolute mechanical power are 4.250 kN and 578.4 W, respectively. MATLAB–CoppeliaSim co-simulation shows overall kinematic trends consistent with the analytical predictions. Prototype functional testing demonstrates the feasibility of main-arm lifting during cleaning-module retraction without observed mechanical interference. Together, these results provide an engineering basis for selecting the wire-rope attachment position and motion duration while accounting for the attainable working swing range and predicted actuator loads.
Förderung
- National Natural Science Foundation of China
- Gansu Provincial Youth Science and Technology Fund
- Gansu Provincial Key Talent Program
- Gansu Provincial Humanities and Social Sciences Project
Zitieren
APA
Kang, R., Wang, C., Zhao, Y., Han, L., Li, C., Dai, B., & Ning, H. (2026). Structural Parameter Optimization and Motion Planning of a Hydraulic Swing Mechanism for a Ground-Mobile Photovoltaic Panel Cleaning Robot. Applied Sciences, 16(22), 11389. https://doi.org/10.3390/app162211389
Vancouver
Kang R, Wang C, Zhao Y, Han L, Li C, Dai B, et al. Structural Parameter Optimization and Motion Planning of a Hydraulic Swing Mechanism for a Ground-Mobile Photovoltaic Panel Cleaning Robot. Applied Sciences. 2026;16(22):11389. doi:10.3390/app162211389
BibTeX
@article{Kang2026,
author = {Kang, Ru and Wang, Chunlei and Zhao, Yanbin and Han, Ling and Li, Cuiming and Dai, Baolin and Ning, Huifeng},
title = {Structural Parameter Optimization and Motion Planning of a Hydraulic Swing Mechanism for a Ground-Mobile Photovoltaic Panel Cleaning Robot},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {22},
pages = {11389},
doi = {10.3390/app162211389}
}
EUVIMED