EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

What Changes with Xenomai 4? An Empirical Study of Real-Time Performance in EtherCAT-Based Robotic Control

Keon Woo Kim, Raimarius Delgado

Applied Sciences · 17.11.2026 · 16 (22) · 11386

DOI: 10.3390/app162211386 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 17.11.2026. Verfasst von Keon Woo Kim und 1 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Myongji University, Korea Institute of Science and Technology (KIST) Institutional Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Xenomai 4 replaces several longstanding mechanisms of Xenomai 3 with an integrated Embedded Virtual Linux (EVL) architecture, motivating a controlled reassessment of real-time Linux behavior in application-oriented control workloads. This study compares PREEMPT_RT, Xenomai 3/Cobalt, and Xenomai 4/EVL on an Intel multicore platform and a Raspberry Pi 5 using a common evaluation framework covering periodic scheduling, synchronization, inter-domain communication, and UDP networking under idle and CPU/memory interference conditions. Two measurement issues are addressed: lower-priority observed-period wobble is separated from release-based response time, and a fixed-work execution budget generator is used to mitigate preemption absorption by wall-clock busy waiting. The benchmark results show that timing behavior is platform- and metric-dependent rather than uniformly ordered across frameworks. EVL exhibits concentrated synchronization tails and allows an out-of-band application thread to perform UDP communication without demotion even when final NIC I/O is handled by a generic in-band driver (this configuration is not equivalent to an end-to-end out-of-band hardware path). The benchmark findings are then examined in an EtherCAT collaborative robot case study at 1 ms and 0.5 ms master software cycle periods. On the NUC, Cobalt uses the native RTDM EtherCAT path available in the tested configuration, while EVL and PREEMPT_RT use in-band paths; on the Raspberry Pi 5, all three frameworks use the generic in-band path. Across the experiments, the results show that practical real-time performance depends jointly on kernel architecture, processor microarchitecture, workload interference, and driver or middleware support. Together, these findings advance the empirical understanding of real-time Linux systems and provide a reproducible methodological reference and practical engineering guidelines for academia and industry in designing, evaluating, and deploying future real-time robotic control architectures.

Förderung

  • Myongji University
  • Korea Institute of Science and Technology (KIST) Institutional Program

Zitieren

APA

Kim, K. W., & Delgado, R. (2026). What Changes with Xenomai 4? An Empirical Study of Real-Time Performance in EtherCAT-Based Robotic Control. Applied Sciences, 16(22), 11386. https://doi.org/10.3390/app162211386

Vancouver

Kim KW, Delgado R. What Changes with Xenomai 4? An Empirical Study of Real-Time Performance in EtherCAT-Based Robotic Control. Applied Sciences. 2026;16(22):11386. doi:10.3390/app162211386

BibTeX
@article{Kim2026,
  author = {Kim, Keon Woo and Delgado, Raimarius},
  title = {What Changes with Xenomai 4? An Empirical Study of Real-Time Performance in EtherCAT-Based Robotic Control},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {11386},
  doi = {10.3390/app162211386}
}
Kostenlos starten →