Design of a New Metric for the Quality of Resistance Spot Welds
Applied Sciences · 14.11.2026 · 16 (22) · 11290
DOI: 10.3390/app162211290 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 14.11.2026. Verfasst von Gerardo Morales-Sánchez und 2 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Complex-phase (CP) steels are increasingly used in automotive applications because of their high mechanical strength and potential for reducing structural weight. However, their microstructural and mechanical characteristics may limit the applicability of conventional criteria for assessing resistance spot welded joints. This study experimentally investigates the weldability of CP1000 steel from an industrial perspective, focusing on the definition of a weldability window based on joint mechanical performance. The proposed approach was evaluated using two industrial resistance spot welding configurations, both operating with medium-frequency direct current (MFDC): pedestal and robot-mounted welding systems. Experimental tests were performed under different welding conditions to characterize weld nugget diameter and maximum tensile–shear load, complemented by microstructural analysis. The results show that welding parameters established for conventional steels cannot necessarily be directly transferred to CP1000. Moreover, weld nugget diameter alone does not consistently reflect joint mechanical performance, particularly when different fracture behaviors occur. Therefore, a weldability window based on a mechanical strength criterion is proposed as a complementary alternative to the conventional nugget diameter criterion. The results demonstrate that this approach provides a more representative assessment of weld quality under the investigated conditions and can support welding process optimization and industrial decision-making.
Zitieren
APA
Morales-Sánchez, G., Collazo, A., & Doval-Gandoy, J. (2026). Design of a New Metric for the Quality of Resistance Spot Welds. Applied Sciences, 16(22), 11290. https://doi.org/10.3390/app162211290
Vancouver
Morales-Sánchez G, Collazo A, Doval-Gandoy J. Design of a New Metric for the Quality of Resistance Spot Welds. Applied Sciences. 2026;16(22):11290. doi:10.3390/app162211290
BibTeX
@article{MoralesSnchez2026,
author = {Morales-Sánchez, Gerardo and Collazo, Antonio and Doval-Gandoy, Jesús},
title = {Design of a New Metric for the Quality of Resistance Spot Welds},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {22},
pages = {11290},
doi = {10.3390/app162211290}
}
EUVIMED