EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Coupled Electromechanical Modeling and Frequency Tuning of a Vortex-Induced Vibration Bladeless Wind Turbine

Isaac Hernández-Arriaga, Daniel Hernández-Arriaga, Paola Andrea Forero-Sossa, Daniel Armando Serrano-Huerta, Abisai Jaime Reséndiz-Barrón

Applied Sciences · 13.11.2026 · 16 (22) · 11286

DOI: 10.3390/app162211286 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 13.11.2026. Verfasst von Isaac Hernández-Arriaga und 4 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tecnológico Nacional de México.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Vortex-induced-vibration bladeless wind turbines exhibit limited energy-harvesting bandwidth because their aeroelastic response varies with wind speed. This study investigates a tunable turbine incorporating a variable-effective-length clamped–clamped beam spring with a theoretical stiffness range of 4500–30,000 N/m. An eight-state nonlinear model couples structural motion, electromagnetic conversion, and a bidirectional wake oscillator. Numerical benchmarking, frequency-domain analyses, and constrained optimization characterize the resulting dynamics. At 3 m/s, the optimized configuration generated 35.68 mW mean electrical power while satisfying lateral and axial displacement limits of 35 and 3 mm, respectively. Wind-speed-dependent tuning increased the mean power to 114.67 mW at 3.6 m/s. Using site-specific hourly wind data, estimated gross annual generation reached 140.29 Wh compared with 28.21 and 10.26 Wh for conventional and fixed-stiffness configurations, respectively. Estimated actuator consumption was 13.30 Wh annually. However, Monte Carlo simulations revealed joint robustness probabilities of only 1.5–3.5% under simultaneous parameter uncertainties. These findings demonstrate the potential of adaptive stiffness tuning while emphasizing the need for robust design, aerodynamic calibration, and experimental validation.

Förderung

  • Tecnológico Nacional de México

Zitieren

APA

Hernández-Arriaga, I., Hernández-Arriaga, D., Forero-Sossa, P. A., Serrano-Huerta, D. A., & Reséndiz-Barrón, A. J. (2026). Coupled Electromechanical Modeling and Frequency Tuning of a Vortex-Induced Vibration Bladeless Wind Turbine. Applied Sciences, 16(22), 11286. https://doi.org/10.3390/app162211286

Vancouver

Hernández-Arriaga I, Hernández-Arriaga D, Forero-Sossa PA, Serrano-Huerta DA, Reséndiz-Barrón AJ. Coupled Electromechanical Modeling and Frequency Tuning of a Vortex-Induced Vibration Bladeless Wind Turbine. Applied Sciences. 2026;16(22):11286. doi:10.3390/app162211286

BibTeX
@article{HernndezArriaga2026,
  author = {Hernández-Arriaga, Isaac and Hernández-Arriaga, Daniel and Forero-Sossa, Paola Andrea and Serrano-Huerta, Daniel Armando and Reséndiz-Barrón, Abisai Jaime},
  title = {Coupled Electromechanical Modeling and Frequency Tuning of a Vortex-Induced Vibration Bladeless Wind Turbine},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {11286},
  doi = {10.3390/app162211286}
}
Kostenlos starten →