EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Gas–Liquid Two-Phase Flow on Tubing Axial Force and Buckling in Deepwater High-Temperature and High-Pressure Gas Wells

Shuaishuai Sun, Guowei Zhu, Guozhen Liu, Shuai Zhang, Guiqi Sun, Xiang Zhou, Liangjie Mao

Applied Sciences · 12.11.2026 · 16 (22) · 11235

DOI: 10.3390/app162211235 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 12.11.2026. Verfasst von Shuaishuai Sun und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Science and Technology Major Project of the Ministry of Science and Technology of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

During production of high-temperature and high-pressure (HTHP) gas wells, condensate and formation water may generate gas–liquid two-phase flow, altering wellbore temperature and pressure and consequently affecting the axial loading and buckling risk of packer-constrained production tubing. This study establishes a sequentially coupled thermal–hydraulic and tubing-mechanics framework that transfers distributed two-phase temperature–pressure profiles to thermal, piston and ballooning load calculations. The governing conservation equations are solved iteratively along the well trajectory, and potential sinusoidal- and helical-buckling intervals are identified using critical-load criteria. Validation against field data from four offshore HTHP gas wells in China yielded relative errors of 5.48–8.52% for wellhead temperature and 4.16–7.57% for wellhead pressure. At the same bottomhole pressure, the predicted wellhead pressure was 22 MPa for two-phase flow and 38 MPa for single-phase gas, indicating that neglecting the liquid phase substantially underestimates wellbore pressure loss. Increasing the bottomhole inlet liquid volume fraction from 10% to 25% raised the wellhead temperature from 45.6 to 51.6 °C, reduced the wellhead pressure from 35.6 to 25.7 MPa, and decreased the wellhead axial force from 406.9 to 384.4 kN. Higher gas production shifted critical-load crossings towards shallower depths, while their absolute locations depended on the adopted buckling criterion. The model provides a comparative assessment of thermal–hydraulic loading and criterion sensitivity in HTHP gas wells under steady homogeneous flow and quasi-static tubing mechanics.

Förderung

  • the National Science and Technology Major Project of the Ministry of Science and Technology of China

Zitieren

APA

Sun, S., Zhu, G., Liu, G., Zhang, S., Sun, G., Zhou, X., & Mao, L. (2026). Effects of Gas–Liquid Two-Phase Flow on Tubing Axial Force and Buckling in Deepwater High-Temperature and High-Pressure Gas Wells. Applied Sciences, 16(22), 11235. https://doi.org/10.3390/app162211235

Vancouver

Sun S, Zhu G, Liu G, Zhang S, Sun G, Zhou X, et al. Effects of Gas–Liquid Two-Phase Flow on Tubing Axial Force and Buckling in Deepwater High-Temperature and High-Pressure Gas Wells. Applied Sciences. 2026;16(22):11235. doi:10.3390/app162211235

BibTeX
@article{Sun2026,
  author = {Sun, Shuaishuai and Zhu, Guowei and Liu, Guozhen and Zhang, Shuai and Sun, Guiqi and Zhou, Xiang and Mao, Liangjie},
  title = {Effects of Gas–Liquid Two-Phase Flow on Tubing Axial Force and Buckling in Deepwater High-Temperature and High-Pressure Gas Wells},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {11235},
  doi = {10.3390/app162211235}
}
Kostenlos starten →