EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Investigation of Underwater Collision Response and Damage Characteristics of Ring-Stiffened UUV Pressure Hulls

Haoyang Kang, Shuangqiang Wang, Zhiang Liu, Xu Yang, Dong Song, Chao Wang, Da Hui

Applied Sciences · 12.11.2026 · 16 (22) · 11222

DOI: 10.3390/app162211222 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 12.11.2026. Verfasst von Haoyang Kang und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Youth Talent Project, First Class Construction Special Fund Project, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accidental collisions can cause local denting and plastic deformation of underwater-vehicle pressure hulls, thereby compromising structural integrity and operational safety. Previous research has given limited attention to how ring frames carry collision loads and how local internal forces relate to overall hull deformation. This study numerically investigates the underwater collision response of a cylindrical unmanned underwater vehicle (UUV) pressure hull stiffened by regular and heavy T-section ring frames. The arbitrary Lagrangian–Eulerian (ALE) method is used to model the fluid–structure interaction during impact. The numerical procedures for structural collision response and hydrodynamic loading are validated against a published pressure-hull collision case and a wedge-impact test on a water-tank side plate, respectively. Parametric analyses are then performed for impact velocity, impact angle, axial impact location, and equal-area variations in ring-frame cross-sectional geometry. Local indentation, plastic deformation, ring-frame internal forces, and the partition of internal energy between the shell and ring frames are examined to clarify the effects of impact loading and the restraint provided by ring frames along the hull axis on damage evolution and deformation modes. Increasing impact velocity increases shell indentation and the extent of plastic deformation, whereas the maximum heavy-frame bending moment at maximum indentation changes little at higher impact velocities. Aligning the impact point with a heavy ring frame and increasing the overall frame-section height at a constant cross-sectional area both enhance the restraint provided by the frame system, increase the ring-frame share of structural internal energy, and reduce local shell indentation. These findings provide a basis for collision-resistant design, representative collision-scenario selection, and assessment of post-collision indentation and plastic deformation of ring-stiffened UUV pressure hulls.

Förderung

  • National Youth Talent Project
  • First Class Construction Special Fund Project
  • National Natural Science Foundation of China

Zitieren

APA

Kang, H., Wang, S., Liu, Z., Yang, X., Song, D., Wang, C., & Hui, D. (2026). Numerical Investigation of Underwater Collision Response and Damage Characteristics of Ring-Stiffened UUV Pressure Hulls. Applied Sciences, 16(22), 11222. https://doi.org/10.3390/app162211222

Vancouver

Kang H, Wang S, Liu Z, Yang X, Song D, Wang C, et al. Numerical Investigation of Underwater Collision Response and Damage Characteristics of Ring-Stiffened UUV Pressure Hulls. Applied Sciences. 2026;16(22):11222. doi:10.3390/app162211222

BibTeX
@article{Kang2026,
  author = {Kang, Haoyang and Wang, Shuangqiang and Liu, Zhiang and Yang, Xu and Song, Dong and Wang, Chao and Hui, Da},
  title = {Numerical Investigation of Underwater Collision Response and Damage Characteristics of Ring-Stiffened UUV Pressure Hulls},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {11222},
  doi = {10.3390/app162211222}
}
Kostenlos starten →