EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Additive Manufacturing of Photocatalytic Reactors for Water Remediation: Architectures, Validation Standards, Reusability, and Scale-Up

Nikolaos R. Vrithias, Zacharias Viskadourakis, Maria Steiakaki, Vassilis M. Papadakis, Emmanouel Koudoumas, George Kenanakis

Applied Sciences · 03.11.2026 · 16 (21) · 10912

DOI: 10.3390/app162110912 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 03.11.2026. Verfasst von Nikolaos R. Vrithias und 5 weiteren Autor:innen. Die Arbeit nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: HORIZON-IA.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Photocatalysis is a powerful advanced oxidation process for water remediation, yet benchmarking has disproportionately relied on model organic dye pollutants under idealized conditions—overstating practical performance and obscuring mechanistic complexity. Three-dimensional (3D) printing now offers an unprecedented opportunity to engineer photocatalytic reactors with precisely controlled architectures, optimized mass transfer, tunable porosity, and defined light-penetration channels—capabilities unattainable with conventional slurry or thin-film configurations. This systematic and critical review examines the state of the art in additive manufacturing of photocatalytic reactors for water treatment, focusing on three under-developed dimensions: (i) performance validation against environmentally relevant contaminants—pharmaceuticals, endocrine-disrupting compounds (EDCs), PFAS, microplastics, and waterborne pathogens; (ii) mechanistic rigor, including reactive oxygen species (ROS) identification, quantum yield determination, and mineralization metrics; and (iii) genuine reusability under realistic cycling conditions. The dominant printing modalities—FDM/FFF, SLA, DLP, DIW, and binder jetting—are critically evaluated for photocatalyst loading, geometric resolution, and scalability. A persistent gap is identified between proof-of-concept studies and systems capable of rigorous quantitative benchmarking. To address this, a minimum reporting standard is proposed, and the materials, engineering, and regulatory challenges that must be resolved before 3D-printed photocatalytic reactors can transition from academic novelties to deployable treatment units are outlined. A total of nine peer-reviewed studies, identified through a systematic search of Scopus and Web of Science (2016–2026), form the evidence base for the quantitative assessments reported herein. Screening and data extraction were performed by a single reviewer (G.K.) without independent verification, which represents a limitation of the review.

Förderung

  • HORIZON-IA

Zitieren

APA

Vrithias, N. R., Viskadourakis, Z., Steiakaki, M., Papadakis, V. M., Koudoumas, E., & Kenanakis, G. (2026). Additive Manufacturing of Photocatalytic Reactors for Water Remediation: Architectures, Validation Standards, Reusability, and Scale-Up. Applied Sciences, 16(21), 10912. https://doi.org/10.3390/app162110912

Vancouver

Vrithias NR, Viskadourakis Z, Steiakaki M, Papadakis VM, Koudoumas E, Kenanakis G. Additive Manufacturing of Photocatalytic Reactors for Water Remediation: Architectures, Validation Standards, Reusability, and Scale-Up. Applied Sciences. 2026;16(21):10912. doi:10.3390/app162110912

BibTeX
@article{Vrithias2026,
  author = {Vrithias, Nikolaos R. and Viskadourakis, Zacharias and Steiakaki, Maria and Papadakis, Vassilis M. and Koudoumas, Emmanouel and Kenanakis, George},
  title = {Additive Manufacturing of Photocatalytic Reactors for Water Remediation: Architectures, Validation Standards, Reusability, and Scale-Up},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {21},
  pages = {10912},
  doi = {10.3390/app162110912}
}
Kostenlos starten →