Effects of Main Spar Geometry and Layup Parameters on Bend–Twist Response and Structural Performance Balance in Wind Turbine Blades
Applied Sciences · 02.11.2026 · 16 (21) · 10837
DOI: 10.3390/app162110837 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 02.11.2026. Verfasst von Hongjin Ma und 3 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xinjiang Uygur Autonomous Region Central Guidance Local Science and Technology Development Fund Project.
Abstract (Originalsprache)
Geometric and laminate modifications can increase bending-induced twists in wind turbine blade spars, but the associated changes in deformation, stress, mass, and vibration are not always assessed on a consistent basis. This study therefore compares the structural trade-offs of four established design parameters under a common finite-element framework. An equivalent thin-walled composite box-spar model based on the NREL 5 MW reference blade was developed using a midsurface representation with spanwise-varying cross-sections, zoned layups, and thickness tapering. Spar-cap thickness, shear-web inclination angle, spar-cap off-axis ply angle, and off-axis ply fraction were varied individually under consistent loading and boundary conditions. The results show that spar-cap thickness primarily influences flapwise deflection and structural mass. Shear-web inclination produces the largest twist-to-deflection response index, reaching approximately 1.17–1.21 °/m at ±20°, but also increases tip deflection and peak equivalent stress. Increasing the off-axis ply angle or fraction does not improve this response for the investigated layups. For the C2 configuration, the response index decreases to approximately 22% of the baseline value, accompanied by increased deflection and stress and reduced natural frequencies. These findings reveal parameter-dependent structural trade-offs under the prescribed model and loading conditions, providing a comparative basis for further blade-spar design and validation.
Förderung
- Xinjiang Uygur Autonomous Region Central Guidance Local Science and Technology Development Fund Project
Zitieren
APA
Ma, H., Gao, J., Yuan, Y., & Pan, R. (2026). Effects of Main Spar Geometry and Layup Parameters on Bend–Twist Response and Structural Performance Balance in Wind Turbine Blades. Applied Sciences, 16(21), 10837. https://doi.org/10.3390/app162110837
Vancouver
Ma H, Gao J, Yuan Y, Pan R. Effects of Main Spar Geometry and Layup Parameters on Bend–Twist Response and Structural Performance Balance in Wind Turbine Blades. Applied Sciences. 2026;16(21):10837. doi:10.3390/app162110837
BibTeX
@article{Ma2026,
author = {Ma, Hongjin and Gao, Jianxiong and Yuan, Yiping and Pan, Rui},
title = {Effects of Main Spar Geometry and Layup Parameters on Bend–Twist Response and Structural Performance Balance in Wind Turbine Blades},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {21},
pages = {10837},
doi = {10.3390/app162110837}
}
EUVIMED