EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Classification of Intact Rock Uniaxial Compressive Strength Using Measurement-While-Drilling Data from Tunnel Drilling Jumbos: Method Development and Field Validation on the Sichuan–Tibet Railway

Yang Li, Haiqiang Yang, Yanmeng Wang, Hao Liu, Jian Wang

Applied Sciences · 31.10.2026 · 16 (21) · 10821

DOI: 10.3390/app162110821 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 31.10.2026. Verfasst von Yang Li und 4 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Natural Science Foundation of Jiangsu Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Identifying rock conditions ahead of a tunnel face is essential for drilling-parameter optimization, construction safety, and support design. Measurement-while-drilling (MWD) data from drilling jumbos offer a continuous, low-cost basis for this task, but non-steady operational states introduce strong disturbances. Based on the XCMG XTD3133C drilling jumbo, this study develops an MWD-based method for classifying intact-rock uniaxial compressive strength (UCS) grade. Bench-scale and engineering field data are assembled into an annotated database linking UCS results to borehole positions, and the two datasets are modelled and evaluated separately. Non-steady drilling states are identified and removed using physical correlations among pressure, rate, and speed signals, and the penetration-rate signal is smoothed by a moving average. Long short-term memory (LSTM) and deep neural network (DNN) classifiers are compared across input-parameter combinations, with the borehole as the unit of data partitioning. LSTM-3 and DNN-3 reach accuracies of 0.957 and 0.983 on bench-scale data, and 0.917 and 0.928 on field data from a Sichuan–Tibet Railway section, with balanced accuracies of 0.914 and 0.927. Considering acquisition cost, model complexity, and deployment stability, DNN-3—using three pressures and the penetration rate—is selected as the preferred candidate for on-board deployment.

Förderung

  • the Natural Science Foundation of Jiangsu Province

Zitieren

APA

Li, Y., Yang, H., Wang, Y., Liu, H., & Wang, J. (2026). Classification of Intact Rock Uniaxial Compressive Strength Using Measurement-While-Drilling Data from Tunnel Drilling Jumbos: Method Development and Field Validation on the Sichuan–Tibet Railway. Applied Sciences, 16(21), 10821. https://doi.org/10.3390/app162110821

Vancouver

Li Y, Yang H, Wang Y, Liu H, Wang J. Classification of Intact Rock Uniaxial Compressive Strength Using Measurement-While-Drilling Data from Tunnel Drilling Jumbos: Method Development and Field Validation on the Sichuan–Tibet Railway. Applied Sciences. 2026;16(21):10821. doi:10.3390/app162110821

BibTeX
@article{Li2026,
  author = {Li, Yang and Yang, Haiqiang and Wang, Yanmeng and Liu, Hao and Wang, Jian},
  title = {Classification of Intact Rock Uniaxial Compressive Strength Using Measurement-While-Drilling Data from Tunnel Drilling Jumbos: Method Development and Field Validation on the Sichuan–Tibet Railway},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {21},
  pages = {10821},
  doi = {10.3390/app162110821}
}
Kostenlos starten →