EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Continuous Drill-Wear Scoring from Images of Drilled Holes in Melamine-Faced Chipboard Using Order-Supervised Ranking with Vision Foundation Models

Bogdan Arct, Albina Jegorowa, Jarosław Kurek

Applied Sciences · 30.10.2026 · 16 (21) · 10752

DOI: 10.3390/app162110752 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 30.10.2026. Verfasst von Bogdan Arct und 2 weiteren Autor:innen. Die Arbeit nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In industry a drill is judged only as fit or worn; the three-class scheme with an intermediate warning state, introduced in earlier studies, smooths monitoring and lets tool replacement be planned ahead, yet hides the gradual nature of wear. This feasibility study proposes a continuous drill-wear index on a 0–100 scale, estimated from images of holes drilled in melamine-faced chipboard without per-hole wear measurements. The index is learned from two weak supervision signals: the drilling order within each drill’s life, through a pairwise ranking loss, and the wear classes, as anchors tied to the thresholds W=0.2 mm and W=0.35 mm. Vision foundation models (DINOv2, ConvNeXt V2) are fine-tuned on 8526 hole images from five drills and evaluated by leave-one-drill-out validation. On held-out drills the index follows the drilling order (profile-level Spearman correlation 0.97) and recovers the classes with 66.7–69.9% accuracy, similar to cross-entropy classifiers; its errors fall mainly towards the more worn class, and worn drills are rarely judged sharp. Conformal prediction sets reach a coverage near 90% on average but not on every drill, and an exploratory remaining-life extrapolation is at best comparable to a lifetime baseline. Larger tool batches are needed before industrial use.

Zitieren

APA

Arct, B., Jegorowa, A., & Kurek, J. (2026). Continuous Drill-Wear Scoring from Images of Drilled Holes in Melamine-Faced Chipboard Using Order-Supervised Ranking with Vision Foundation Models. Applied Sciences, 16(21), 10752. https://doi.org/10.3390/app162110752

Vancouver

Arct B, Jegorowa A, Kurek J. Continuous Drill-Wear Scoring from Images of Drilled Holes in Melamine-Faced Chipboard Using Order-Supervised Ranking with Vision Foundation Models. Applied Sciences. 2026;16(21):10752. doi:10.3390/app162110752

BibTeX
@article{Arct2026,
  author = {Arct, Bogdan and Jegorowa, Albina and Kurek, Jarosław},
  title = {Continuous Drill-Wear Scoring from Images of Drilled Holes in Melamine-Faced Chipboard Using Order-Supervised Ranking with Vision Foundation Models},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {21},
  pages = {10752},
  doi = {10.3390/app162110752}
}
Kostenlos starten →