EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal Bottleneck Identification and Parameter Impact Analysis of Internal Packaging Layers in Liquid-Cooled IGBT Modules

Xianjin Yin, Tianyu Ma, Wang Dou, Feng Wang

Applied Sciences · 11.09.2026 · 16 (18) · 9044

DOI: 10.3390/app16189044 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 11.09.2026. Verfasst von Xianjin Yin und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chongqing Academy of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the challenge of quantitatively identifying thermal-resistance contributions from multi-layer packaging structures within liquid-cooled insulated-gate bipolar transistor (IGBT) modules, this study establishes a three-dimensional conjugate heat-transfer model incorporating the chip, solder layer, direct-bonded copper (DBC) ceramic layer, substrate, elliptical pin-fin heat sink, and fluid domain. The IGBT and fast-recovery diode (FRD) power losses under typical motor controller operating conditions are modeled as volumetric heat sources applied to the chip region. Based on model validation, an internal thermal bottleneck evaluation method is proposed using inter-layer temperature-drop decomposition, introducing the thermal bottleneck number (BN) to quantify the temperature-drop contribution of each packaging layer along the target chip’s heat-dissipation path. Results show that in the baseline structure, the DBC ceramic layer is the critical internal thermal bottleneck, with a BN value of 11.05%. When the DBC thermal conductivity increases from 20 W/(m·K) to 80 W/(m·K), the maximum junction temperature of the IGBT decreases from 413.32 K to 396.79 K, and the BN drops from 11.05% to 3.69%. Conversely, when the DBC thickness increases from 0.20 mm to 0.50 mm, the maximum junction temperature rises from 405.45 K to 424.42 K. Further analysis reveals that after weakening the DBC thermal bottleneck, the relative temperature-drop contribution of the solder interface becomes increasingly apparent; notably, a central 20% low-conductivity defect in the solder layer raises the maximum junction temperature to 517.16 K, 103.84 K higher than under normal solder conditions. These findings provide valuable insights for identifying internal thermal bottlenecks and optimizing packaging structures in liquid-cooled IGBT modules.

Förderung

  • Chongqing Academy of Science and Technology

Zitieren

APA

Yin, X., Ma, T., Dou, W., & Wang, F. (2026). Thermal Bottleneck Identification and Parameter Impact Analysis of Internal Packaging Layers in Liquid-Cooled IGBT Modules. Applied Sciences, 16(18), 9044. https://doi.org/10.3390/app16189044

Vancouver

Yin X, Ma T, Dou W, Wang F. Thermal Bottleneck Identification and Parameter Impact Analysis of Internal Packaging Layers in Liquid-Cooled IGBT Modules. Applied Sciences. 2026;16(18):9044. doi:10.3390/app16189044

BibTeX
@article{Yin2026,
  author = {Yin, Xianjin and Ma, Tianyu and Dou, Wang and Wang, Feng},
  title = {Thermal Bottleneck Identification and Parameter Impact Analysis of Internal Packaging Layers in Liquid-Cooled IGBT Modules},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {18},
  pages = {9044},
  doi = {10.3390/app16189044}
}
Kostenlos starten →