EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Automatic Structured Mesh Generation Method for Wing Configuration Based on Adaptive Parametric Multi-Block Topology

Meng Jiang, Zibin Zhao, Jianqiang Chen, Jiaxi Li, Yan Sun

Applied Sciences · 30.07.2026 · 16 (15) · 7588

DOI: 10.3390/app16157588 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 30.07.2026. Verfasst von Meng Jiang und 4 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Numerical Windtunnel.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Structured mesh generation is critical for high-fidelity Computational Fluid Dynamics (CFD) simulations; however, the automatic generation of multi-block structured meshes for complex three-dimensional (3D) wings remains a long-standing challenge. Traditional methods heavily rely on manual multi-block topology decomposition, while recent intelligent methods suffer from limited generalizability, reliance on labeled training data, and inadequate boundary-layer controllability. This paper proposes a fully automatic structured mesh generation method for arbitrary 3D wing configurations based on adaptive parametric multi-block topology. First, a geometric parameterization framework for 3D wings is established using the Gordon surface method. Then, the multi-block topology is adaptively generated analytically via parametric construction of control vertices and edges. Finally, a four-level assembly process is employed to generate the final mesh. Systematic tests on wings with various aspect ratios, sweep angles, and deformations demonstrate that the method exhibits excellent robustness. Generating a one-million-cell mesh requires only 0.391 s (single-threaded), which is approximately six times faster than existing intelligent methods. CFD results of benchmark wings show good agreement with available reference data, while the static aeroelastic characteristics of the custom flying-wing model conform to physical principles. This study provides a generalizable, interpretable, and fully automatic solution for structured mesh generation of 3D wings.

Förderung

  • National Numerical Windtunnel

Zitieren

APA

Jiang, M., Zhao, Z., Chen, J., Li, J., & Sun, Y. (2026). Automatic Structured Mesh Generation Method for Wing Configuration Based on Adaptive Parametric Multi-Block Topology. Applied Sciences, 16(15), 7588. https://doi.org/10.3390/app16157588

Vancouver

Jiang M, Zhao Z, Chen J, Li J, Sun Y. Automatic Structured Mesh Generation Method for Wing Configuration Based on Adaptive Parametric Multi-Block Topology. Applied Sciences. 2026;16(15):7588. doi:10.3390/app16157588

BibTeX
@article{Jiang2026,
  author = {Jiang, Meng and Zhao, Zibin and Chen, Jianqiang and Li, Jiaxi and Sun, Yan},
  title = {Automatic Structured Mesh Generation Method for Wing Configuration Based on Adaptive Parametric Multi-Block Topology},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {15},
  pages = {7588},
  doi = {10.3390/app16157588}
}
Kostenlos starten →