Systematic Control of Primary and Secondary Structure Periods in Four-Beam Direct Laser Interference Patterning
Applied Sciences · 30.07.2026 · 16 (15) · 7560
DOI: 10.3390/app16157560 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 30.07.2026. Verfasst von Kehkashan Alam und 3 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Austrian Research Promotion Agency FFG.
Abstract (Originalsprache)
Four-beam Direct Laser Interference Patterning (DLIP) enables the fabrication of periodic surface micro- or nanostructures with various geometrical features. In practice, even a small deviation in beam alignment can alter the resulting morphology, leading to isotropic circular dot patterns, anisotropic structures, rotated patterns, and secondary periodic modulation superimposed on the primary structure. In this work, five representative four-beam DLIP cases were experimentally fabricated, resulting in clearly distinguishable surface morphologies. To identify the incident beam parameters from the fabricated patterns, a Two-Beam Decomposition Method (TBDM) was used. The complex four-beam DLIP structures were decomposed into their six pairwise two-beam configurations, and the angles of incidence (AoIs) and azimuthal angles were reconstructed from the measured spatial periods and relative fringe orientations. Based on the reconstructed beam parameters, an analytical wavevector framework was used to explain the formation of primary structure periods and the secondary period. The obtained results establish a direct correlation between the beam geometry and fabricated surface morphology in four-beam DLIP. The proposed TBDM approach provides a systematic framework for analyzing multi-beam interference patterns and for intentionally designing the complex DLIP-based surface structures with controlled primary and secondary periods.
Förderung
- Austrian Research Promotion Agency FFG
Zitieren
APA
Alam, K., Zeller, P., Otto, A., & Fürbacher, R. (2026). Systematic Control of Primary and Secondary Structure Periods in Four-Beam Direct Laser Interference Patterning. Applied Sciences, 16(15), 7560. https://doi.org/10.3390/app16157560
Vancouver
Alam K, Zeller P, Otto A, Fürbacher R. Systematic Control of Primary and Secondary Structure Periods in Four-Beam Direct Laser Interference Patterning. Applied Sciences. 2026;16(15):7560. doi:10.3390/app16157560
BibTeX
@article{Alam2026,
author = {Alam, Kehkashan and Zeller, Philipp and Otto, Andreas and Fürbacher, Roland},
title = {Systematic Control of Primary and Secondary Structure Periods in Four-Beam Direct Laser Interference Patterning},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {15},
pages = {7560},
doi = {10.3390/app16157560}
}
EUVIMED