EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Empirical Effective Strain Model for CFRP Plates Bonded to Concrete Using the Externally Bonded Reinforcement on the Grooves

Sangwon Ji, Kinam Hong, Kyubyung Kang, Changseok Jang

Applied Sciences · 16.07.2026 · 16 (14) · 7125

DOI: 10.3390/app16147125 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 16.07.2026. Verfasst von Sangwon Ji und 3 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chungbuk National University NUDP program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Externally bonded reinforcement (EBR) using fiber reinforced polymer (FRP) is one of the most widely used techniques for strengthening reinforced concrete (RC) structures. However, early debonding of the concrete surface layer in the EBR method limits its structural performance. Recently, the externally bonded reinforcement on grooves (EBROG) method has emerged as a promising alternative. This study experimentally investigates the bond behavior between CFRP plates and concrete strengthened using the EBROG method. A total of 78 specimens were fabricated and evaluated using single-lap shear tests. The investigated parameters include groove dimensions, number of grooves, and concrete compressive strength. A digital image correlation (DIC) system was used to measure displacement. Unlike the EBR method, no debonding of the concrete surface layer occurred in the EBROG specimens, and the bond strength improved by 49.56–154.48% without additional surface treatment. Increased groove dimensions and a greater number of grooves significantly enhanced the bond performance. Higher concrete compressive strength and larger groove dimensions also delayed the onset of debonding. Based on the experimental results, a new effective strain model was proposed, and flexural capacity predictions using this model showed higher accuracy than those obtained from existing models.

Förderung

  • Chungbuk National University NUDP program

Zitieren

APA

Ji, S., Hong, K., Kang, K., & Jang, C. (2026). Empirical Effective Strain Model for CFRP Plates Bonded to Concrete Using the Externally Bonded Reinforcement on the Grooves. Applied Sciences, 16(14), 7125. https://doi.org/10.3390/app16147125

Vancouver

Ji S, Hong K, Kang K, Jang C. Empirical Effective Strain Model for CFRP Plates Bonded to Concrete Using the Externally Bonded Reinforcement on the Grooves. Applied Sciences. 2026;16(14):7125. doi:10.3390/app16147125

BibTeX
@article{Ji2026,
  author = {Ji, Sangwon and Hong, Kinam and Kang, Kyubyung and Jang, Changseok},
  title = {Empirical Effective Strain Model for CFRP Plates Bonded to Concrete Using the Externally Bonded Reinforcement on the Grooves},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {14},
  pages = {7125},
  doi = {10.3390/app16147125}
}
Kostenlos starten →