EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Current Status and Research Evolution of Magnetic Fluid Sealing Technology

Xueqin Wu, Shouchun Liu, Wangxu Li, Shuai Wang, Wenping Mao, Zhenggui Li

Applied Sciences · 08.07.2026 · 16 (14) · 6836

DOI: 10.3390/app16146836 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 08.07.2026. Verfasst von Xueqin Wu und 5 weiteren Autor:innen. Die Arbeit nennt 94 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Qinghai Province, Qinghai Province “Kunlun Talents” Talent Introduction Program, the Graduate Student Innovation Star Program of Gansu Provincial Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnetic fluid seals use magnetic field gradients generated by permanent magnets, pole pieces, and rotating shafts to confine ferrofluid in the sealing gap and form multiple liquid sealing rings. Compared with mechanical and labyrinth seals, they exhibit low wear, high cleanliness, low friction loss, and near-zero leakage, making them suitable for high-vacuum equipment, semiconductor devices, clean robotic joints, and rotary feedthrough systems. This review summarizes the development, theoretical basis, experimental methods, structural design, performance characteristics, failure mechanisms, numerical modeling approaches, and engineering applications of magnetic fluid sealing technology. Quantitative comparisons show that ferrofluid seals generally provide a single-stage pressure-bearing capacity of approximately 10–20 kPa with near-zero leakage and good self-replenishment, whereas magnetic powder seals can reach approximately 50–100 kPa per stage but suffer from higher leakage and poor self-recovery. Under high-speed conditions, centrifugal depletion, viscous heating, carrier-liquid volatilization, and interfacial instability become the dominant causes of performance degradation. The reviewed literature indicates that pole-tooth geometry, magnetic-circuit topology, saturation magnetization, thermal transport, and medium compatibility jointly determine sealing reliability. Future research should focus on high-saturation and low-vapor-pressure ferrofluids, optimized pole-tooth and magnetic-circuit structures, magnetic–flow–thermal coupling, integrated cooling, online monitoring, life prediction, and standardized reliability evaluation.

Förderung

  • Natural Science Foundation of Qinghai Province
  • Qinghai Province “Kunlun Talents” Talent Introduction Program
  • the Graduate Student Innovation Star Program of Gansu Provincial Universities

Zitieren

APA

Wu, X., Liu, S., Li, W., Wang, S., Mao, W., & Li, Z. (2026). Current Status and Research Evolution of Magnetic Fluid Sealing Technology. Applied Sciences, 16(14), 6836. https://doi.org/10.3390/app16146836

Vancouver

Wu X, Liu S, Li W, Wang S, Mao W, Li Z. Current Status and Research Evolution of Magnetic Fluid Sealing Technology. Applied Sciences. 2026;16(14):6836. doi:10.3390/app16146836

BibTeX
@article{Wu2026,
  author = {Wu, Xueqin and Liu, Shouchun and Li, Wangxu and Wang, Shuai and Mao, Wenping and Li, Zhenggui},
  title = {Current Status and Research Evolution of Magnetic Fluid Sealing Technology},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {14},
  pages = {6836},
  doi = {10.3390/app16146836}
}
Kostenlos starten →