EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Milling Force Prediction Based on Spindle Current Signal

Boyang Meng, Hengshuo Wang, Tongjie Zhu, Caixu Yue, Xianli Liu

Applied Sciences · 06.07.2026 · 16 (13) · 6773

DOI: 10.3390/app16136773 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 06.07.2026. Verfasst von Boyang Meng und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Outstanding Youth Science Fund of Heilongjiang Province, 2023 Domestic Numerical Control System Application Demonstration Project, Ministry of Education Industry-Education Collaboration Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Spindle-current-based force estimation provides a nonintrusive alternative to dynamometer-based milling-force measurement, but its accuracy is limited by the nonlinear and time-dependent relationship between spindle current and cutting force. This study proposes a CNN–ResNet–RF model for instantaneous milling-force prediction using only spindle current signals as input. In the proposed architecture, CNN layers extract local temporal features from windowed current sequences, residual blocks refine multiscale force-related representations, and a random-forest regressor performs nonlinear force regression. Milling experiments were conducted on 7075 aluminum alloy and steel 45 using a five-axis machining center. To prevent temporal data leakage, the synchronized and preprocessed current–force data were divided at the continuous cutting trial level into training, validation, and independent test subsets. On the independent test subset, the proposed model achieved an R2 value of 0.952, an MAE of 2.793 N, and an RMSE of 4.301 N, outperforming the CNN, CNN–ResNet, and RF baseline models in terms of prediction accuracy and error reduction. These results demonstrate that the CNN–ResNet–RF framework improves test-set milling-force prediction within the tested machining range.

Förderung

  • Outstanding Youth Science Fund of Heilongjiang Province
  • 2023 Domestic Numerical Control System Application Demonstration Project
  • Ministry of Education Industry-Education Collaboration Project

Zitieren

APA

Meng, B., Wang, H., Zhu, T., Yue, C., & Liu, X. (2026). Milling Force Prediction Based on Spindle Current Signal. Applied Sciences, 16(13), 6773. https://doi.org/10.3390/app16136773

Vancouver

Meng B, Wang H, Zhu T, Yue C, Liu X. Milling Force Prediction Based on Spindle Current Signal. Applied Sciences. 2026;16(13):6773. doi:10.3390/app16136773

BibTeX
@article{Meng2026,
  author = {Meng, Boyang and Wang, Hengshuo and Zhu, Tongjie and Yue, Caixu and Liu, Xianli},
  title = {Milling Force Prediction Based on Spindle Current Signal},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {13},
  pages = {6773},
  doi = {10.3390/app16136773}
}
Kostenlos starten →