EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Testing and Experimental Research on the Flexural Stiffness of Alpine Ski Boots Based on Buckling Mechanical Characteristics

Xiangkui Qin, Hailian Li, Guoheng Wang, Zhuangzhuang Liu, Rui Wang, Guangzheng Wang, Chunyang Luo, Jianyong Li

Applied Sciences · 04.07.2026 · 16 (13) · 6699

DOI: 10.3390/app16136699 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 04.07.2026. Verfasst von Xiangkui Qin und 7 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Special Project of Science and Technology for the Winter Olympic Games, Science and Technology Development Plan Project of Jilin Province, Task Book of the Science and Technology Development Plan Project of Jilin Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Existing buckling stiffness tests usually load the ski boot in a manner that changes with the buckling angle of the boot cuff. As a result, the direction of the applied force changes as the cuff bends, which can cause a deviation between the measured force and the actual acting force and can influence the test result. In this study, a new buckling stiffness test device was designed and constructed. By introducing a translational-rod loading structure, the device keeps the loading force perpendicular to the prosthetic-foot loading rod throughout the test. Tests were conducted at a room temperature of 15 °C, with a fixed force-arm length of L = 0.31 m and a standard binding tension of F = 40 N, thereby improving the consistency of load-angle measurement. A binding-force adjustment unit was also designed through computer-aided design, and the standard binding force was determined through subjective comfort tests involving 20 skiers, enabling consistent control of the tightness state of the ski boot. Theoretically, the expression for ski-boot buckling stiffness was established using an equivalent torsional-spring model. Under small-angle and quasi-static conditions, the equivalent buckling stiffness was represented as a linear relationship between the applied load and the normalized deflection angle. The experimental results show that, within the loading range of 60–260 N, the relationship between load and deformation exhibited good linearity, with coefficients of determination of 0.986–0.996. Repeatability tests showed that the coefficients of variation of load and deflection-angle measurements were controlled within 0.40–1.48% and 6.92–8.26%, respectively, and the relative expanded uncertainty of equivalent buckling stiffness was 7.33–11.93%. These results indicate that the device has good stability. Although the fitted curves showed slight nonzero intercepts, these mainly originated from clamping error, contact effects, and sensor zero drift, and did not affect stiffness identification. Overall, the device can provide stable and reliable buckling stiffness measurement and offers an effective method for evaluating ski-boot performance.

Förderung

  • Key Special Project of Science and Technology for the Winter Olympic Games
  • Science and Technology Development Plan Project of Jilin Province
  • Task Book of the Science and Technology Development Plan Project of Jilin Province
  • Graduate Innovation Program of Beihua University

Zitieren

APA

Qin, X., Li, H., Wang, G., Liu, Z., Wang, R., Wang, G., Luo, C., & Li, J. (2026). Testing and Experimental Research on the Flexural Stiffness of Alpine Ski Boots Based on Buckling Mechanical Characteristics. Applied Sciences, 16(13), 6699. https://doi.org/10.3390/app16136699

Vancouver

Qin X, Li H, Wang G, Liu Z, Wang R, Wang G, et al. Testing and Experimental Research on the Flexural Stiffness of Alpine Ski Boots Based on Buckling Mechanical Characteristics. Applied Sciences. 2026;16(13):6699. doi:10.3390/app16136699

BibTeX
@article{Qin2026,
  author = {Qin, Xiangkui and Li, Hailian and Wang, Guoheng and Liu, Zhuangzhuang and Wang, Rui and Wang, Guangzheng and Luo, Chunyang and Li, Jianyong},
  title = {Testing and Experimental Research on the Flexural Stiffness of Alpine Ski Boots Based on Buckling Mechanical Characteristics},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {13},
  pages = {6699},
  doi = {10.3390/app16136699}
}
Kostenlos starten →