EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Jerk-Constrained Feedrate Scheduling for Biaxial Contouring Systems: A Planning-to-Execution Simulation Study

Yiqian Jia, Ruoqing Wu, Zeyun Shang, Jihang Wang, Yilin Yang, Sumin Guo

Applied Sciences · 27.06.2026 · 16 (13) · 6432

DOI: 10.3390/app16136432 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 27.06.2026. Verfasst von Yiqian Jia und 5 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tianjin Science and Technology Bureau.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biaxial contouring systems are widely used in planar precision motion applications, where the assigned feedrate profile strongly affects motion smoothness, contour-following accuracy, and robustness during servo execution. However, many existing studies mainly focus on either controller-side contour-error regulation or planning-layer time optimality, while the influence of jerk-sensitive feedrate transitions on downstream contouring behavior is still insufficiently examined. To address this issue, this paper proposes a jerk-constrained and execution-aware feedrate scheduling framework for biaxial contouring systems. Starting from the admissible feedrate boundary determined by contour geometry and motion constraints, an acceleration-feasible baseline schedule is first generated through bidirectional reachability propagation. Then, jerk-oriented smoothness refinement and critical-region-preserving correction are introduced to suppress abrupt local transitions while maintaining dynamic admissibility and practical traversal efficiency. The refined path-domain schedule is further reconstructed into time-domain axis-level references for closed-loop contouring evaluation. A planning-to-execution simulation study is conducted on three representative contours, including a rounded triangular contour, an elliptical contour, and a butterfly-cross contour. The proposed method is compared with several baseline scheduling strategies under nominal, low-bandwidth, flexible-resonance, and parameter-mismatch conditions. The simulation results indicate that the proposed scheduler can reduce concentrated jerk responses and resonance-sensitive high-frequency excitation while achieving a more balanced tradeoff among traversal time, contouring accuracy, and robustness. The results also show that the benefit of the proposed method becomes more evident for geometrically complex contours and deteriorated servo conditions. The present study provides simulation-based evidence that execution-aware feedrate scheduling is an effective way to improve biaxial contouring performance without redesigning the low-level servo controller.

Förderung

  • Tianjin Science and Technology Bureau

Zitieren

APA

Jia, Y., Wu, R., Shang, Z., Wang, J., Yang, Y., & Guo, S. (2026). Jerk-Constrained Feedrate Scheduling for Biaxial Contouring Systems: A Planning-to-Execution Simulation Study. Applied Sciences, 16(13), 6432. https://doi.org/10.3390/app16136432

Vancouver

Jia Y, Wu R, Shang Z, Wang J, Yang Y, Guo S. Jerk-Constrained Feedrate Scheduling for Biaxial Contouring Systems: A Planning-to-Execution Simulation Study. Applied Sciences. 2026;16(13):6432. doi:10.3390/app16136432

BibTeX
@article{Jia2026,
  author = {Jia, Yiqian and Wu, Ruoqing and Shang, Zeyun and Wang, Jihang and Yang, Yilin and Guo, Sumin},
  title = {Jerk-Constrained Feedrate Scheduling for Biaxial Contouring Systems: A Planning-to-Execution Simulation Study},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {13},
  pages = {6432},
  doi = {10.3390/app16136432}
}
Kostenlos starten →