EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Anti-Icing Liquid-Infused Coating for Wind Turbine Blades

Elisabet Afonso, Annand Raj Palanisamy, Esben Thormann, Taeseong Kim, Andreas Kaiser

Applied Sciences · 23.06.2026 · 16 (13) · 6308

DOI: 10.3390/app16136308 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 23.06.2026. Verfasst von Elisabet Afonso und 4 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Icing phenomena on wind turbine blades and components are a major problem, causing downtimes that increase maintenance costs, reducing the blade’s lifespan, or in severe cases, even leading to component damage. A nanofiber-based bi-layer liquid-infused surface (BLIS) coating was prepared and characterized, combining good adhesion to wind turbine blades with low ice adhesion. The BLIS coating was produced by a new method combining electrospinning and a heat treatment step, containing a poly ethyl-2-cyanoacrylate (PECA)-based adhesive layer, a slippery layer of poly vinylidene fluoride-co-hexafluoropropylene (PVDF-HFP) copolymer, and an infiltrated perfluoropolyether lubricant. Thermogravimetric analysis (TGA) was used to ensure the thermal stability of the polymers in the nanofiber coating layers and to optimize the heat treatment process of the layers. Microstructural changes were studied by scanning electron microscopy (SEM) and surface roughness measurements. Contact angle measurements and sliding velocity tests on wind turbine blade segments at icing conditions of 0 °C and +5 °C indicate that the water sliding properties of the BLIS coating were improved compared to uncoated blades. In addition, coated blade segments showed a 50% lower ice adhesion strength than uncoated blades.

Förderung

  • European Commission

Zitieren

APA

Afonso, E., Palanisamy, A. R., Thormann, E., Kim, T., & Kaiser, A. (2026). Anti-Icing Liquid-Infused Coating for Wind Turbine Blades. Applied Sciences, 16(13), 6308. https://doi.org/10.3390/app16136308

Vancouver

Afonso E, Palanisamy AR, Thormann E, Kim T, Kaiser A. Anti-Icing Liquid-Infused Coating for Wind Turbine Blades. Applied Sciences. 2026;16(13):6308. doi:10.3390/app16136308

BibTeX
@article{Afonso2026,
  author = {Afonso, Elisabet and Palanisamy, Annand Raj and Thormann, Esben and Kim, Taeseong and Kaiser, Andreas},
  title = {Anti-Icing Liquid-Infused Coating for Wind Turbine Blades},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {13},
  pages = {6308},
  doi = {10.3390/app16136308}
}
Kostenlos starten →