Iterative Form-Finding Method for Overhead Transmission Conductors Based on a Geometric Update Strategy
Applied Sciences · 12.06.2026 · 16 (12) · 5976
DOI: 10.3390/app16125976 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 12.06.2026. Verfasst von Huaichao Wang und 5 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Beijing Electric Power Economic and Technological Research Institute Co., Ltd., National Natural Science Foundation of China.
Abstract (Originalsprache)
Overhead transmission conductors are flexible cable structures. Their initial equilibrium configuration is affected by self-weight, tension, boundary constraints, and material deformation, and is required for force analysis, sag calculation, and safety assessment. Existing studies use catenary theory or numerical iterative methods. The direct iterative method is used in conductor form-finding. However, its geometric update ratio is assigned in segments based on empirical thresholds. This may cause unsmooth updates, low efficiency, and numerical instability in sensitive cases. This study investigates a single-span conductor within a nonlinear finite element form-finding framework. The direct iterative method is analyzed in terms of control variables, implementation process, and update-ratio control mode. A continuous error-driven adaptive geometric update strategy is proposed and an adaptive direct iterative method is developed. The two methods are compared under the same finite element model, parameters, loads, constraints, convergence threshold, and maximum iterations. Three factors are selected: element number, nonlinear substep number, and initial strain coefficient. A total of 27 full-factorial cases are calculated. Convergence efficiency, final error, and abnormal case distribution are evaluated. The results show that the proposed method reduces iterations, improves computational efficiency, and enhances numerical stability in sensitive cases without changing the finite element solution framework.
Förderung
- Beijing Electric Power Economic and Technological Research Institute Co., Ltd.
- National Natural Science Foundation of China
Zitieren
APA
Wang, H., Xia, D., Zhou, A., Xiong, X., Feng, X., & Sun, Q. (2026). Iterative Form-Finding Method for Overhead Transmission Conductors Based on a Geometric Update Strategy. Applied Sciences, 16(12), 5976. https://doi.org/10.3390/app16125976
Vancouver
Wang H, Xia D, Zhou A, Xiong X, Feng X, Sun Q. Iterative Form-Finding Method for Overhead Transmission Conductors Based on a Geometric Update Strategy. Applied Sciences. 2026;16(12):5976. doi:10.3390/app16125976
BibTeX
@article{Wang2026,
author = {Wang, Huaichao and Xia, Dongsheng and Zhou, Anqi and Xiong, Xiaoyu and Feng, Xin and Sun, Qing},
title = {Iterative Form-Finding Method for Overhead Transmission Conductors Based on a Geometric Update Strategy},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {12},
pages = {5976},
doi = {10.3390/app16125976}
}
EUVIMED