A Point-Laser-Constrained Three-Dimensional Localization Method for Ship Welding Start Points
Applied Sciences · 10.06.2026 · 16 (12) · 5845
DOI: 10.3390/app16125845 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 10.06.2026. Verfasst von Zefeng Wang und 3 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhejiang-French Digital Monitoring Lab for Aquatic Resources and Environment, Department of Science and Technology of Zhejiang Province.
Abstract (Originalsprache)
During the start stage of ship welding, obtaining the three-dimensional coordinates of welding target points is affected by confined installation space, surface reflection, and deployment constraints. This paper proposes a low-complexity point-wise three-dimensional localization method based on two-dimensional visual planar guidance and one-dimensional point-laser distance constraints. A direct computation model of the laser incident point in the robot base coordinate system is established from the tool center point pose, the extrinsic parameters of the point-laser module, and real-time ranging data, enabling target-point coordinate estimation without dense three-dimensional reconstruction. A dual-stage stabilization strategy is introduced by combining ranging-level filtering, spatial coordinate smoothing, and outlier suppression. Image error-based visual closed-loop alignment is further used as a pre-measurement step to ensure that the point laser acts on the target region. Experimental results show that, after workplane-level extrinsic correction, independent validation points achieve a mean three-dimensional Euclidean error of 1.54 mm with a standard deviation of 0.28 mm. The average planar error in closed-loop alignment experiments is 1.124 mm. Passive binocular depth measurement on the current platform still yields an RMSE of 6.16 mm after linear correction. A simulated fillet-weld task verifies the feasibility of the complete perception-to-execution workflow. The proposed method provides a low-complexity coordinate acquisition route for discrete welding target points before arc ignition.
Förderung
- Zhejiang-French Digital Monitoring Lab for Aquatic Resources and Environment, Department of Science and Technology of Zhejiang Province
Zitieren
APA
Wang, Z., Yang, H., Cui, R., & Hu, L. (2026). A Point-Laser-Constrained Three-Dimensional Localization Method for Ship Welding Start Points. Applied Sciences, 16(12), 5845. https://doi.org/10.3390/app16125845
Vancouver
Wang Z, Yang H, Cui R, Hu L. A Point-Laser-Constrained Three-Dimensional Localization Method for Ship Welding Start Points. Applied Sciences. 2026;16(12):5845. doi:10.3390/app16125845
BibTeX
@article{Wang2026,
author = {Wang, Zefeng and Yang, Hongcheng and Cui, Ruifang and Hu, Lianxin},
title = {A Point-Laser-Constrained Three-Dimensional Localization Method for Ship Welding Start Points},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {12},
pages = {5845},
doi = {10.3390/app16125845}
}
EUVIMED