EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Parameters for Obtaining Microparticles Containing Açai Extract (Euterpe precatoria Mart.) by Spray Drying

Fernando Tello, Leny M. Yuyarima, Fernando Castro-Armas, Jessy Vásquez, Eulalia V. Tapia, Michelle Lozada-Urbano, Andrea Velarde, Juan D. Rios-Mera

Applied Sciences · 08.06.2026 · 16 (12) · 5760

DOI: 10.3390/app16125760 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 08.06.2026. Verfasst von Fernando Tello und 7 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 114 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National University of the Peruvian Amazon, Peru.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Açai (Euterpe precatoria Mart.) is a fruit with tremendous bioactive potential, but its high perishability necessitates the use of technologies to improve its stability and further enhance its bioactivity, such as microencapsulation by spray drying. Maltodextrin (MD) and gum Arabic (GA) are commonly used encapsulants in spray drying, but their combination for the microencapsulation of açai extract has not been studied. This study aimed to optimize the microencapsulation of açai extract using spray drying, evaluating its effect on the physicochemical and functional properties of the microparticles (MPs). Optimization was performed using response surface methodology with a central composite rotatable design, considering inlet air temperature (IAT) and polymer ratio (GA:MD) as factors. The optimal conditions were 135 °C IAT and a 50:50 GA:MD, under which a process yield of 76.05%, total phenolic compounds of 2791.83 mg GAE/100 g, and hygroscopicity (HYG) of 7.28% were obtained. Solubility (WSI) and total anthocyanin content (TAC) were not optimized due to lack of fit (p < 0.05). The experimental validation showed precise agreement between predicted and experimental values, with relative errors of less than 5%. The MPs presented spherical forms with rough surfaces. The effectiveness of the microencapsulation process demonstrates the potential of açai MPs as possible functional ingredients for future food applications.

Förderung

  • National University of the Peruvian Amazon, Peru

Zitieren

APA

Tello, F., Yuyarima, L. M., Castro-Armas, F., Vásquez, J., Tapia, E. V., Lozada-Urbano, M., Velarde, A., & Rios-Mera, J. D. (2026). Optimization of Parameters for Obtaining Microparticles Containing Açai Extract (Euterpe precatoria Mart.) by Spray Drying. Applied Sciences, 16(12), 5760. https://doi.org/10.3390/app16125760

Vancouver

Tello F, Yuyarima LM, Castro-Armas F, Vásquez J, Tapia EV, Lozada-Urbano M, et al. Optimization of Parameters for Obtaining Microparticles Containing Açai Extract (Euterpe precatoria Mart.) by Spray Drying. Applied Sciences. 2026;16(12):5760. doi:10.3390/app16125760

BibTeX
@article{Tello2026,
  author = {Tello, Fernando and Yuyarima, Leny M. and Castro-Armas, Fernando and Vásquez, Jessy and Tapia, Eulalia V. and Lozada-Urbano, Michelle and Velarde, Andrea and Rios-Mera, Juan D.},
  title = {Optimization of Parameters for Obtaining Microparticles Containing Açai Extract (Euterpe precatoria Mart.) by Spray Drying},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {12},
  pages = {5760},
  doi = {10.3390/app16125760}
}
Kostenlos starten →