Analysis of the Load on the Open Wagon Body with Paneling Made of Sandwich Corrugated Panels
Applied Sciences · 04.06.2026 · 16 (11) · 5649
DOI: 10.3390/app16115649 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 04.06.2026. Verfasst von Alyona Lovska und 2 weiteren Autor:innen. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Increasing the efficiency of the railway industry requires the creation of solutions aimed at improving the technical, economic, and operational performance of wagons. It would contribute to reducing the cost of their operation. One of the most damaged elements of wagon bodies is their paneling. Its damage not only affects the loss of cargo during transportation but also threatens the safety of the movement of goods. The article is aimed at the load analysis of the body of an open wagon, whose paneling is sandwiched with corrugated panels. This solution will improve the strength of the side walls of the body of the solved freight wagon. This hypothesis has been accepted based on the dynamic load as well as the strength calculated for the body of the solved freight wagon. The dynamic load of the open wagon body has been studied with a mathematical model of its oscillations during the lateral roll. The solution to this model has shown that the maximal values of accelerations are lower by 5% than those acting on the standard design, and they act on the body of the solved freight wagon. The values of accelerations, which act on the body of the solved freight wagon, were calculated by means of numerical simulations using the finite element method implemented in the SolidWorks Simulation software. The discrepancy between the results of mathematical modeling and computer modeling is 6.5%. The strength of the open wagon body has also been calculated. It has been found that the maximal values of stresses in the paneling were lower by 17% than those acting in a standard body structure and 12% lower than the stresses in the body with corrugated panels. The study has also included an analysis of the modal properties of the body of the solved freight wagon, which demonstrates that the safety of the open wagon in motion is observed. The studies conducted will be useful in developing proposals for the creation of the newest wagon designs, including the improved economic, operational, and technical characteristics.
Zitieren
APA
Lovska, A., Gerlici, J., & Dižo, J. (2026). Analysis of the Load on the Open Wagon Body with Paneling Made of Sandwich Corrugated Panels. Applied Sciences, 16(11), 5649. https://doi.org/10.3390/app16115649
Vancouver
Lovska A, Gerlici J, Dižo J. Analysis of the Load on the Open Wagon Body with Paneling Made of Sandwich Corrugated Panels. Applied Sciences. 2026;16(11):5649. doi:10.3390/app16115649
BibTeX
@article{Lovska2026,
author = {Lovska, Alyona and Gerlici, Juraj and Dižo, Ján},
title = {Analysis of the Load on the Open Wagon Body with Paneling Made of Sandwich Corrugated Panels},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {11},
pages = {5649},
doi = {10.3390/app16115649}
}
EUVIMED