Theoretical Modeling and CFD Validation of Outlet Initial Conditions of a Pressure-Swirl Nozzle Under Microgravity
Applied Sciences · 01.06.2026 · 16 (11) · 5487
DOI: 10.3390/app16115487 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 01.06.2026. Verfasst von Hailong Wu und 5 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China.
Abstract (Originalsprache)
A reduced-order framework was developed to describe the outlet initial conditions of a pressure-swirl nozzle under reduced-gravity conditions and to clarify how gravity modifies the nozzle-exit state relative to the corresponding 1 g baseline. Under normal gravity, the baseline outlet state was established through CFD-informed identification of the discharge coefficient and initial spray cone angle, from which the outlet axial and tangential velocity components were reconstructed. Gravity-induced deviations were then introduced through compact correction relationships for the outlet descriptors and liquid-film geometry. The outlet parameters were evaluated over pressure drops of 0.1–0.5 MPa and gravity levels from 1 g to 10−5 g. The results indicate that operating pressure mainly determines the baseline outlet state, whereas reduced gravity acts primarily as a correction to that baseline. Under forward-gravity injection, decreasing gravity reduces the axial and tangential velocity components, discharge coefficient, and initial spray cone angle, while increasing the outlet liquid-film thickness. A CFD-based comparison at 0.3 MPa indicates that the framework captures the first-order trends of normalized outlet velocity components and liquid-film thickness within the investigated conditions. Independent experimental validation is not included in this study and remains necessary for future quantitative assessment.
Förderung
- National Key R&D Program of China
Zitieren
APA
Wu, H., Zhang, X., Zhao, P., Fang, Y., Zheng, H., & Yang, X. (2026). Theoretical Modeling and CFD Validation of Outlet Initial Conditions of a Pressure-Swirl Nozzle Under Microgravity. Applied Sciences, 16(11), 5487. https://doi.org/10.3390/app16115487
Vancouver
Wu H, Zhang X, Zhao P, Fang Y, Zheng H, Yang X. Theoretical Modeling and CFD Validation of Outlet Initial Conditions of a Pressure-Swirl Nozzle Under Microgravity. Applied Sciences. 2026;16(11):5487. doi:10.3390/app16115487
BibTeX
@article{Wu2026,
author = {Wu, Hailong and Zhang, Xiaowu and Zhao, Pingping and Fang, Yu and Zheng, Huilong and Yang, Xiaofang},
title = {Theoretical Modeling and CFD Validation of Outlet Initial Conditions of a Pressure-Swirl Nozzle Under Microgravity},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {11},
pages = {5487},
doi = {10.3390/app16115487}
}
EUVIMED