EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Defect-Tolerant Interfacial Compatibilization of Heterogeneous Recycled Polypropylene via Binary iPP-g-MA/aPP-g-MA Masterbatches

Ruohan Liu, Haidi Cai, Zhonghua Tang, Liang Tong

Applied Sciences · 25.05.2026 · 16 (11) · 5266

DOI: 10.3390/app16115266 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 25.05.2026. Verfasst von Ruohan Liu und 3 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Postdoctoral Science Foundation, Overseas Talent Introduction Program of Jiangxi Province, Jiangxi University of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Single-use polypropylene (PP) food containers represent a rapidly growing waste stream characterized by compositional heterogeneity and microstructural defects. Conventional reactive compatibilization using isotactic maleic anhydride-grafted PP (iPP-g-MA) provides rigid crystalline anchoring but lacks the interfacial flexibility to accommodate complex micro-defects. Herein, we propose a defect-tolerant compatibilization strategy by developing a binary iPP-g-MA/aPP-g-MA masterbatch for real post-consumer rPP derived from food-service containers. The amorphous aPP-g-MA component is proposed to provide a compliant interfacial environment that accommodates stress concentrations associated with microscale defects, whereas the iPP-g-MA component contributes crystalline anchoring with the recycled PP matrix. This soft/hard interfacial architecture is supported by grafting-degree analysis, GPC, XRD, DSC crystallization behavior, and SEM fracture morphology. The 1:1 mass-ratio binary formulation shows a marked improvement in elongation at break to 200%, representing a 203% increase relative to the single-component iMA system. The notched Charpy impact strength is enhanced to 8.98 kJ m−2, while tensile strength is retained at 20.9 MPa within the typical strength–ductility trade-off of polymer toughening. TGA shows no premature degradation within the melt-processing window, indicating adequate thermal stability for melt reprocessing. This study provides a compositionally tunable, data-supported route for high-value upcycling of heterogeneous post-consumer polyolefins. From an application viewpoint, the improved ductility-impact balance makes the material relevant to injection-moulded semi-structural products such as storage crates, appliance housings, and automotive interior panels.

Förderung

  • China Postdoctoral Science Foundation
  • Overseas Talent Introduction Program of Jiangxi Province
  • Jiangxi University of Science and Technology
  • Key Scientific and Technological Research Project of Jiangxi Provincial Department of Education
  • Key Laboratory of Functional Crystal Materials Chemistry of Jiangxi Province
  • Key Laboratory of Functional Molecular Materials Chemistry of Jiangxi Province

Zitieren

APA

Liu, R., Cai, H., Tang, Z., & Tong, L. (2026). Defect-Tolerant Interfacial Compatibilization of Heterogeneous Recycled Polypropylene via Binary iPP-g-MA/aPP-g-MA Masterbatches. Applied Sciences, 16(11), 5266. https://doi.org/10.3390/app16115266

Vancouver

Liu R, Cai H, Tang Z, Tong L. Defect-Tolerant Interfacial Compatibilization of Heterogeneous Recycled Polypropylene via Binary iPP-g-MA/aPP-g-MA Masterbatches. Applied Sciences. 2026;16(11):5266. doi:10.3390/app16115266

BibTeX
@article{Liu2026,
  author = {Liu, Ruohan and Cai, Haidi and Tang, Zhonghua and Tong, Liang},
  title = {Defect-Tolerant Interfacial Compatibilization of Heterogeneous Recycled Polypropylene via Binary iPP-g-MA/aPP-g-MA Masterbatches},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {5266},
  doi = {10.3390/app16115266}
}
Kostenlos starten →