EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Determination of Added-Mass Coefficients in Eccentrically Confined Square Cylinders Using Deforming-Mesh and Immersed-Boundary Methods

Bruno Oettinger-Barrientos, Armando Blanco-Alvarez, Gonzalo Tampier

Applied Sciences · 23.05.2026 · 16 (11) · 5239

DOI: 10.3390/app16115239 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 23.05.2026. Verfasst von Bruno Oettinger-Barrientos und 2 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad Austral de Chile, ANID IDEA.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate prediction of hydrodynamic forces on confined oscillating structures is essential in applications related to nuclear engineering, energy systems, offshore devices, and mechanical components subjected to flow-induced vibrations. In this work, two computational fluid dynamics (CFD) methodologies implemented in ANSYS CFX are compared to determine the added-mass coefficients for a square cross-section cylinder confined within a square container: a deforming-mesh method (DMM) and an immersed-boundary method (IBM). Unlike previous studies restricted either to concentric square cylinders or to eccentric configurations treated with potential flow, the present study addresses eccentric confined configurations by solving the incompressible Navier–Stokes equations and focuses primarily on the prediction of added mass under strong confinement. Horizontal, vertical, and combined eccentric displacements are analyzed in detail. Mesh-independence, domain-size sensitivity, and temporal-convergence analyses are performed. Results show that both methods provide closely matching added-mass predictions over a wide range of eccentricities, with relative differences typically below 1% for moderate eccentricities, although discrepancies increase under extreme confinement. Relative to the concentric configuration, the added-mass coefficient increases by about 44% for the most eccentric vertical case and by about 87% for the most eccentric corner-approach case. Force decomposition and pressure-field analysis show that this increase is governed primarily by pressure-induced inertial effects, whereas viscous shear plays a secondary role under the conditions considered. From a practical standpoint, the immersed-boundary method reduced the computational time by approximately 92% in the most demanding case.

Förderung

  • Universidad Austral de Chile
  • ANID IDEA

Zitieren

APA

Oettinger-Barrientos, B., Blanco-Alvarez, A., & Tampier, G. (2026). Determination of Added-Mass Coefficients in Eccentrically Confined Square Cylinders Using Deforming-Mesh and Immersed-Boundary Methods. Applied Sciences, 16(11), 5239. https://doi.org/10.3390/app16115239

Vancouver

Oettinger-Barrientos B, Blanco-Alvarez A, Tampier G. Determination of Added-Mass Coefficients in Eccentrically Confined Square Cylinders Using Deforming-Mesh and Immersed-Boundary Methods. Applied Sciences. 2026;16(11):5239. doi:10.3390/app16115239

BibTeX
@article{OettingerBarrientos2026,
  author = {Oettinger-Barrientos, Bruno and Blanco-Alvarez, Armando and Tampier, Gonzalo},
  title = {Determination of Added-Mass Coefficients in Eccentrically Confined Square Cylinders Using Deforming-Mesh and Immersed-Boundary Methods},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {5239},
  doi = {10.3390/app16115239}
}
Kostenlos starten →