Numerical Simulation and Verification of Vacuum Induction Melting Gas Atomization
Applied Sciences · 21.05.2026 · 16 (10) · 5133
DOI: 10.3390/app16105133 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 21.05.2026. Verfasst von Huabo Wu und 7 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Aero Engine Corporation of China, Natural Science Foundation of China, Young Elite Scientists Sponsorship Program by CAST.
Abstract (Originalsprache)
For the Vacuum Induction Gas Atomization (VIGA) powder preparation process, a multi-scale coupled numerical simulation and experimental validation were employed to systematically reveal the influence mechanisms of process parameters on the primary atomization flow field structure, secondary atomization droplet breakup behavior, and powder particle size distribution Using Computational Fluid Dynamics (CFD) methods combined with the VOF (Volume of Fluid) multiphase flow model, the fragmentation morphology of the melt during primary atomization was simulated, capturing the dynamic characteristics of liquid film thinning and the reduction in initial droplet area. Concurrently, the DPM (Discrete Phase Model) coupled with the TAB (Taylor Analogy Breakup) model was applied to predict the droplet size distribution in secondary atomization. The results indicate that increasing atomization pressure (2.5–4.5 MPa) significantly enhances secondary fragmentation intensity, reducing the median particle size (D50) from 42.1 μm to 37.5 μm. Experimental studies on Ni-based superalloys, validated by laser particle size analysis, confirmed that higher atomization pressure improves gas velocity and gas–liquid energy conversion efficiency, optimizes turbulent flow structures, and refines powder particles. The study concludes that the multi-scale coupled model effectively predicts atomization dynamics. By optimizing atomization pressure, powder particle size can be significantly refined, providing a theoretical basis for process control of high-performance spherical powders used in additive manufacturing.
Förderung
- Aero Engine Corporation of China
- Natural Science Foundation of China
- Young Elite Scientists Sponsorship Program by CAST
- Top Ten Science and Technology Projects in Hunan Province
- Scientific and Technological Project of Yunnan Precious Metals Laboratory
- Major Science and Technology Projects of Yunnan Province
- Shandong Provincial Technological Innovation Guidance Program
- High Performance Computing Center of Central South University, and Project Supported by State Key Laboratory of Powder Metallurgy, Central South University, Ch…
Zitieren
APA
Wu, H., Lv, J., Tan, L., Wang, Y., Zhang, D., Sun, J., Liu, F., & Huang, L. (2026). Numerical Simulation and Verification of Vacuum Induction Melting Gas Atomization. Applied Sciences, 16(10), 5133. https://doi.org/10.3390/app16105133
Vancouver
Wu H, Lv J, Tan L, Wang Y, Zhang D, Sun J, et al. Numerical Simulation and Verification of Vacuum Induction Melting Gas Atomization. Applied Sciences. 2026;16(10):5133. doi:10.3390/app16105133
BibTeX
@article{Wu2026,
author = {Wu, Huabo and Lv, Jin and Tan, Liming and Wang, Yan and Zhang, Dejin and Sun, Jing and Liu, Feng and Huang, Lan},
title = {Numerical Simulation and Verification of Vacuum Induction Melting Gas Atomization},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {10},
pages = {5133},
doi = {10.3390/app16105133}
}
EUVIMED