Pressure Changes During Lunar Regolith Simulant Movement in Dusty Thermal Vacuum Chamber
Applied Sciences · 20.05.2026 · 16 (10) · 5082
DOI: 10.3390/app16105082 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 20.05.2026. Verfasst von Karol Seweryn und 2 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A dusty thermal vacuum chamber (DTVAC) equipped with a regolith simulant bin is a key infrastructure to validate space equipment planned to operate in the future lunar missions. The proper setup of such infrastructure is challenging since the regolith simulant needs to be outgassed; otherwise, it might affect the validation process. This paper presents the results of experiments conducted in a dusty thermal vacuum chamber. The experiment was designed to verify if lunar regolith simulants prepared and placed in the bin may preserve atmospheric gases after the chamber depressurization process. Such hypotheses were defined after testing a drill in vacuum conditions, the performance of which was higher than expected. The obtained results show that the preparation and placement of regolith in the bin should be performed under vacuum conditions regardless of the external temperature.
Zitieren
APA
Seweryn, K., Uhl, T., & Teper, W. (2026). Pressure Changes During Lunar Regolith Simulant Movement in Dusty Thermal Vacuum Chamber. Applied Sciences, 16(10), 5082. https://doi.org/10.3390/app16105082
Vancouver
Seweryn K, Uhl T, Teper W. Pressure Changes During Lunar Regolith Simulant Movement in Dusty Thermal Vacuum Chamber. Applied Sciences. 2026;16(10):5082. doi:10.3390/app16105082
BibTeX
@article{Seweryn2026,
author = {Seweryn, Karol and Uhl, Tadeusz and Teper, Wojciech},
title = {Pressure Changes During Lunar Regolith Simulant Movement in Dusty Thermal Vacuum Chamber},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {10},
pages = {5082},
doi = {10.3390/app16105082}
}
EUVIMED