EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Adaptation and Mechanical Validation of a COTS Telescope for LEO Hyperspectral Imaging Using an Additively Manufactured Structure

Henrik H. Øvrebø, Brage Sterkeby Hole, Henrik Pedersen Hauge, Martin Steinert, Anna Olsen, Fred Sigernes, Joseph L. Garrett

Applied Sciences · 18.05.2026 · 16 (10) · 5038

DOI: 10.3390/app16105038 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 18.05.2026. Verfasst von Henrik H. Øvrebø und 6 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Norwegian Space Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Small satellites provide cost-effective platforms for environmental monitoring. Open-source commercial off-the-shelf (COTS) hyperspectral payloads, such as those launched with HYPSO-1 and -2, have a ground sampling distance (GSD) of 100 m. However, detecting smaller features, such as water quality in lakes, requires a GSD below 10 m and a high signal-to-noise ratio. Terrestrial COTS Schmidt–Cassegrain telescopes lack launch-load stiffness and in-orbit refocus capability. This study presents a deployable modified COTS (MCOTS) Schmidt–Cassegrain telescope that uses the original optical COTS components, a 3D-printed high-performance polymer (HPP) structure, and a dual-lead-screw deployment and focusing mechanism. The telescope has a stowed length of 280 mm and deploys to an additional 110 mm, making integration into a 16U platform with a payload length of 290 mm feasible. The modified structure is evaluated using shock and sine-sweep vibration testing, with collimation and focus verified before and after testing. Collimation remained concentric within measurement uncertainty. Complementary random-vibration finite-element simulations predicted a 3σ von Mises stress of 26.5 MPa, yielding a safety factor of 2.8. The results demonstrate a feasible pathway for adapting COTS telescopes toward space-grade COTS (SCOTS) payloads, bridging the gap between rapid production, cost efficiency, and performance for small Earth observation missions.

Förderung

  • Norwegian Space Agency

Zitieren

APA

Øvrebø, H. H., Hole, B. S., Hauge, H. P., Steinert, M., Olsen, A., Sigernes, F., & Garrett, J. L. (2026). Adaptation and Mechanical Validation of a COTS Telescope for LEO Hyperspectral Imaging Using an Additively Manufactured Structure. Applied Sciences, 16(10), 5038. https://doi.org/10.3390/app16105038

Vancouver

Øvrebø HH, Hole BS, Hauge HP, Steinert M, Olsen A, Sigernes F, et al. Adaptation and Mechanical Validation of a COTS Telescope for LEO Hyperspectral Imaging Using an Additively Manufactured Structure. Applied Sciences. 2026;16(10):5038. doi:10.3390/app16105038

BibTeX
@article{vreb2026,
  author = {Øvrebø, Henrik H. and Hole, Brage Sterkeby and Hauge, Henrik Pedersen and Steinert, Martin and Olsen, Anna and Sigernes, Fred and Garrett, Joseph L.},
  title = {Adaptation and Mechanical Validation of a COTS Telescope for LEO Hyperspectral Imaging Using an Additively Manufactured Structure},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {10},
  pages = {5038},
  doi = {10.3390/app16105038}
}
Kostenlos starten →