Study on Ultimate Load-Bearing Capacity and Failure Path of a Road-Rail Combined Steel Truss Bridge
Applied Sciences · 16.05.2026 · 16 (10) · 4989
DOI: 10.3390/app16104989 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 16.05.2026. Verfasst von Lingbo Wang und 4 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shaanxi Provincial Transport Department.
Abstract (Originalsprache)
Road-railway combined steel truss bridges are increasingly adopted in urban infrastructure due to their structural efficiency and versatility. This study proposes a three-level multi-scale finite element framework to investigate the safety reserve and progressive failure mechanism of a four-span (80 + 120 + 120 + 80 m) continuous steel truss bridge carrying both highway and railway traffic. At the macro level, a beam element model was established in Midas/Civil to determine the most unfavorable loading configurations, yielding a minimum buckling load factor of 31.0 under dead load and a maximum vertical displacement of 175 mm at mid-span under combined traffic loading. At the meso level, a mixed beam–shell element model incorporating geometric and material nonlinearities was developed in ABAQUS, revealing an ultimate load factor of 6.61 with distinct progressive failure characteristics: initial yielding occurs near the intermediate pier supports, where deformation is constrained, while final instability develops at Joint A17 due to its lower relative stiffness. At the micro level, a refined solid-shell submodel of the critical joint, driven by displacement boundary conditions extracted from the global model, was constructed to capture the local failure mechanism. The results demonstrate that the governing failure mode is shear buckling of the gusset plate, induced by a vertical displacement differential of approximately 30 mm between the web members on opposite sides of the joint arising from differential stiffness. The stress analysis further reveals pronounced stress concentrations in the splice plates adjacent to the more flexible web member, confirming the asymmetric load distribution mechanism. Based on these findings, strengthening measures including increased gusset plate thickness at pier-top joints, optimized chord sections, and the use of higher-strength steel in critical regions are recommended.
Förderung
- National Natural Science Foundation of China
- Shaanxi Provincial Transport Department
Zitieren
APA
Wang, L., Li, Y., Xi, R., Hou, W., & Wu, K. (2026). Study on Ultimate Load-Bearing Capacity and Failure Path of a Road-Rail Combined Steel Truss Bridge. Applied Sciences, 16(10), 4989. https://doi.org/10.3390/app16104989
Vancouver
Wang L, Li Y, Xi R, Hou W, Wu K. Study on Ultimate Load-Bearing Capacity and Failure Path of a Road-Rail Combined Steel Truss Bridge. Applied Sciences. 2026;16(10):4989. doi:10.3390/app16104989
BibTeX
@article{Wang2026,
author = {Wang, Lingbo and Li, Yifan and Xi, Rongjie and Hou, Wei and Wu, Ke},
title = {Study on Ultimate Load-Bearing Capacity and Failure Path of a Road-Rail Combined Steel Truss Bridge},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {10},
pages = {4989},
doi = {10.3390/app16104989}
}
EUVIMED