EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Fin Length on Frosting and Defrosting Characteristics of Small-Diameter Copper Tube-Fin Heat Exchangers

Dalong Liang, Wenbin Cui

Applied Sciences · 08.05.2026 · 16 (10) · 4663

DOI: 10.3390/app16104663 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 08.05.2026. Verfasst von Dalong Liang und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Frost buildup on copper tube-fin heat exchangers reduces their performance in cold, humid conditions. Fin length plays a key role in balancing heat transfer and frost resistance. This study experimentally examines how fin length affects thermal and frosting behavior. Four heat exchangers with fin lengths of 15.1 mm, 18.53 mm, 20.3 mm, and 23.5 mm were tested at 2 °C/1 °C dry-bulb/wet-bulb air temperature and −6 °C coolant temperature under constant static pressure. Results show that longer fins increase total heat transfer—peak capacity rose from 512 W to 566 W—but reduce heat transfer per unit area by about 30%. Operating time before defrosting increased by 30.6%, from 45.7 min to 59.6 min, due to lower frost density. Total frost mass grew, but unit-area frost decreased by 12.7%. During defrosting, longer fins achieved greater absolute airflow recovery (from 195 to 213 m3h−1), though defrosting efficiency per gram of frost declined. Short fins (15 mm) suit space-limited systems needing high surface efficiency. Long fins (23 mm) benefit large systems requiring long run times and strong post-defrost performance. Medium lengths (17 mm to 20 mm) offer a practical balance for general use. These findings support better heat exchanger design in frost-prone applications.

Zitieren

APA

Liang, D., & Cui, W. (2026). Effects of Fin Length on Frosting and Defrosting Characteristics of Small-Diameter Copper Tube-Fin Heat Exchangers. Applied Sciences, 16(10), 4663. https://doi.org/10.3390/app16104663

Vancouver

Liang D, Cui W. Effects of Fin Length on Frosting and Defrosting Characteristics of Small-Diameter Copper Tube-Fin Heat Exchangers. Applied Sciences. 2026;16(10):4663. doi:10.3390/app16104663

BibTeX
@article{Liang2026,
  author = {Liang, Dalong and Cui, Wenbin},
  title = {Effects of Fin Length on Frosting and Defrosting Characteristics of Small-Diameter Copper Tube-Fin Heat Exchangers},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {10},
  pages = {4663},
  doi = {10.3390/app16104663}
}
Kostenlos starten →