EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Data-Driven Multi-Objective Crashworthiness Optimization of NEV Sill Beam Under Side-Pole Impact

Kewei Li, Peijie Xiao, Hao Li, Jianbing Wu, Jianyu Li, Zhuoran Zeng, Shiwei Xu

Applied Sciences · 08.05.2026 · 16 (10) · 4655

DOI: 10.3390/app16104655 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 08.05.2026. Verfasst von Kewei Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key R&D Program of China, the Joint Funds of the National Natural Science Foundation of China, the Science and Technology Innovation Program of Hunan Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Protecting the power battery pack during side-pole impact poses a critical challenge for new energy vehicle (NEV) passive safety, where traditional methods struggle to balance computational efficiency and predictive accuracy due to strong nonlinearity. This study proposes a multi-stage optimization framework integrating the equivalent static load (ESL) method for nonlinear topology optimization and machine learning-based surrogate modeling. A multi-cell sill beam configuration is first developed via ESL-based topology optimization with deformation mode correction to address localized buckling. Subsequently, independent XGBoost models for intrusion, energy absorption, and mass are constructed, with their hyperparameters efficiently tuned using the Optuna framework with the Tree-structured Parzen Estimator (TPE). Results demonstrate that the optimized XGBoost model achieves superior prediction accuracy (R2 > 0.96) compared to conventional models (SVR, RSM, GPR, and RBF), with RMSE approximately 40% lower than the second-best model (GPR). The Non-dominated Sorting Genetic Algorithm III (NSGA-III) is then employed for tri-objective optimization, and the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) selects an optimal design, which is validated by finite element simulation with high agreement (maximum prediction error < 3%). Compared to the baseline design, the optimized sill beam achieves an 11.44% reduction in maximum intrusion, a 9.86% increase in energy absorption, and a 13.45% reduction in structural mass, demonstrating the effectiveness of the proposed data-driven crashworthiness optimization framework.

Förderung

  • the National Key R&amp;D Program of China
  • the Joint Funds of the National Natural Science Foundation of China
  • the Science and Technology Innovation Program of Hunan Province
  • the Fund of State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body

Zitieren

APA

Li, K., Xiao, P., Li, H., Wu, J., Li, J., Zeng, Z., & Xu, S. (2026). Data-Driven Multi-Objective Crashworthiness Optimization of NEV Sill Beam Under Side-Pole Impact. Applied Sciences, 16(10), 4655. https://doi.org/10.3390/app16104655

Vancouver

Li K, Xiao P, Li H, Wu J, Li J, Zeng Z, et al. Data-Driven Multi-Objective Crashworthiness Optimization of NEV Sill Beam Under Side-Pole Impact. Applied Sciences. 2026;16(10):4655. doi:10.3390/app16104655

BibTeX
@article{Li2026,
  author = {Li, Kewei and Xiao, Peijie and Li, Hao and Wu, Jianbing and Li, Jianyu and Zeng, Zhuoran and Xu, Shiwei},
  title = {Data-Driven Multi-Objective Crashworthiness Optimization of NEV Sill Beam Under Side-Pole Impact},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {10},
  pages = {4655},
  doi = {10.3390/app16104655}
}
Kostenlos starten →