EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quantitative Full-Field Stress Analysis of Sandy Dolomite Using CT-3D Printing–Photoelasticity Approach

Xilin Long, Changxing Zhang, Meiqian Wang, Wenlian Liu, Zhiyi Tang, Wei Xu

Applied Sciences · 08.05.2026 · 16 (10) · 4623

DOI: 10.3390/app16104623 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 08.05.2026. Verfasst von Xilin Long und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Yunnan Fundamental Research Projects.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Quantitative characterization of internal stress fields in fracture-dominated geological materials remains a significant challenge due to the limitations of conventional measurement techniques. This study presents the first quantitative full-field stress analysis of slightly sandy dolomite (Level I sandification) using an enhanced CT-3D printing–photoelasticity workflow. Five transparent physical models were fabricated from CT-scanned dolomite specimens to replicate the natural fracture-matrix structure and tested under diametrical compression (800 N) using ten-step phase-shifting digital photoelasticity. To overcome the severe optical noise generated by dense fracture networks, a robust phase unwrapping procedure (CPULSI) was incorporated into the data processing pipeline, enabling continuous stress parameter retrieval where conventional unwrapping methods fail. The recovered full-field principal stress-difference maps reveal that the internal stress field is dominated by meso-scale fracture geometry: Stress concentrations localize at fracture tips and narrow intact matrix bridges, reaching 3–5 times the far-field stress, while the macro-scale loading pattern becomes progressively obscured as fracture complexity increases across the five models. Quantitative validation against CT-based finite element simulations (RFPA-3D) demonstrates good agreement in intact matrix regions, with mean relative errors of 9–18%. These results provide new experimental evidence for the meso-scale stress distribution mechanisms governing the mechanical behavior of sandy dolomite—a geomaterial of significant engineering relevance in Southwest China—and establish a validated experimental pathway for investigating stress fields in other fracture-dominated geomaterials.

Förderung

  • National Natural Science Foundation of China
  • Yunnan Fundamental Research Projects

Zitieren

APA

Long, X., Zhang, C., Wang, M., Liu, W., Tang, Z., & Xu, W. (2026). Quantitative Full-Field Stress Analysis of Sandy Dolomite Using CT-3D Printing–Photoelasticity Approach. Applied Sciences, 16(10), 4623. https://doi.org/10.3390/app16104623

Vancouver

Long X, Zhang C, Wang M, Liu W, Tang Z, Xu W. Quantitative Full-Field Stress Analysis of Sandy Dolomite Using CT-3D Printing–Photoelasticity Approach. Applied Sciences. 2026;16(10):4623. doi:10.3390/app16104623

BibTeX
@article{Long2026,
  author = {Long, Xilin and Zhang, Changxing and Wang, Meiqian and Liu, Wenlian and Tang, Zhiyi and Xu, Wei},
  title = {Quantitative Full-Field Stress Analysis of Sandy Dolomite Using CT-3D Printing–Photoelasticity Approach},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {10},
  pages = {4623},
  doi = {10.3390/app16104623}
}
Kostenlos starten →