EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Computational Framework for Electric Scooter Neck Design Using Non-Uniform Rational B-Spline-Based Geometric Reconstruction of Topology-Optimized Structures

Hajar Outaybi, Mohammed Berrada-Gouzi, Jaouad El Mekkaoui, Ahmed El Khalfi, Maria Luminița Scutaru, Sorin Vlase

Applied Sciences · 30.04.2026 · 16 (9) · 4398

DOI: 10.3390/app16094398 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 30.04.2026. Verfasst von Hajar Outaybi und 5 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a hybrid Non-Uniform Rational B-Spline (NURBS) methodology for the geometric reconstruction of topology-optimized structural components. NURBS are employed exclusively as a post-processing tool; all structural analyses are performed using standard finite elements (SOLID187 elements, ANSYS Mechanical R19.2), and isogeometric analysis (IGA) is not used. The methodology is validated on an Al 6061-T6 electric scooter neck under a 600 N static load. Two SIMP optimization iterations followed by a hybrid NURBS reconstruction reduce the component mass from 1.247 kg to 0.531 kg, achieving a 57.4% mass reduction. Finite element re-validation of the reconstructed geometry yields a maximum von Mises stress of 126.45 MPa (safety factor, SF = 2.18, exceeding the 2.0 requirement), a maximum deflection of 2.31 mm, and a first natural frequency of 127 Hz. Mesh convergence between the 2.5 mm and 1.25 mm refinements is Δ = 0.90%. Relative to the direct SIMP output (201 MPa), NURBS reconstruction reduces the peak stress by 37%, demonstrating that geometric post-processing is not a neutral step but a critical determinant of structural performance. Both fully automated STL reconstruction and edge-based NURBS reconstruction failed for this geometry class due to non-manifold topology and patch discontinuities, respectively. The proposed hybrid region-decomposition approach is the only method that has produced a watertight, FEA-compatible CAD model.

Zitieren

APA

Outaybi, H., Berrada-Gouzi, M., Mekkaoui, J. E., Khalfi, A. E., Scutaru, M. L., & Vlase, S. (2026). A Computational Framework for Electric Scooter Neck Design Using Non-Uniform Rational B-Spline-Based Geometric Reconstruction of Topology-Optimized Structures. Applied Sciences, 16(9), 4398. https://doi.org/10.3390/app16094398

Vancouver

Outaybi H, Berrada-Gouzi M, Mekkaoui JE, Khalfi AE, Scutaru ML, Vlase S. A Computational Framework for Electric Scooter Neck Design Using Non-Uniform Rational B-Spline-Based Geometric Reconstruction of Topology-Optimized Structures. Applied Sciences. 2026;16(9):4398. doi:10.3390/app16094398

BibTeX
@article{Outaybi2026,
  author = {Outaybi, Hajar and Berrada-Gouzi, Mohammed and Mekkaoui, Jaouad El and Khalfi, Ahmed El and Scutaru, Maria Luminița and Vlase, Sorin},
  title = {A Computational Framework for Electric Scooter Neck Design Using Non-Uniform Rational B-Spline-Based Geometric Reconstruction of Topology-Optimized Structures},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {9},
  pages = {4398},
  doi = {10.3390/app16094398}
}
Kostenlos starten →