EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Stress State Measurement in Wheel Rims by Means of Ultrasonic Velocity

Morana Mihaljević, Zdenka Keran, Hrvoje Cajner, Nataša Tošanović

Applied Sciences · 22.04.2026 · 16 (9) · 4106

DOI: 10.3390/app16094106 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 22.04.2026. Verfasst von Morana Mihaljević und 3 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Interreg IPA ADRION.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tensile and compressive stresses generated during the exploitation of wheel rims can lead to significant failures, posing risks to safety and the environment. Among non-destructive evaluation (NDE) methods, ultrasonic velocity measurement has become widely used for assessing stress states in critical rail vehicle components such as wheel rims. In this study, the relationship between ultrasonic wave velocity and applied compressive stresses in aluminum (EN AW-2011) and austenitic stainless steel (1.4301) specimens is investigated. The methodology integrates ultrasonic time-of-flight (TOF) measurements with controlled mechanical loading up to the elastic limit. The results show that ultrasonic velocity increases with applied compressive stress, with an average change of approximately 40 m/s between unloaded and maximum loading conditions. The material type was identified as the dominant factor, with velocity differences of up to 800 m/s between aluminum and steel, while the applied load contributed changes of approximately 200 m/s. Statistical analysis using Design of Experiments (DOE) and ANOVA confirmed the significance of all main factors (p < 0.0001). The findings demonstrate the sensitivity of ultrasonic velocity to elastic stress states and provide a quantitative basis for the development of reliable in situ ultrasonic stress monitoring systems in rail applications.

Förderung

  • Interreg IPA ADRION

Zitieren

APA

Mihaljević, M., Keran, Z., Cajner, H., & Tošanović, N. (2026). Stress State Measurement in Wheel Rims by Means of Ultrasonic Velocity. Applied Sciences, 16(9), 4106. https://doi.org/10.3390/app16094106

Vancouver

Mihaljević M, Keran Z, Cajner H, Tošanović N. Stress State Measurement in Wheel Rims by Means of Ultrasonic Velocity. Applied Sciences. 2026;16(9):4106. doi:10.3390/app16094106

BibTeX
@article{Mihaljevi2026,
  author = {Mihaljević, Morana and Keran, Zdenka and Cajner, Hrvoje and Tošanović, Nataša},
  title = {Stress State Measurement in Wheel Rims by Means of Ultrasonic Velocity},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {9},
  pages = {4106},
  doi = {10.3390/app16094106}
}
Kostenlos starten →