Synergism of PTFE Nano-Particles and Surface Textures on the Tribological Performance of Cylindrical Roller Thrust Bearings Under Starved Lubrication
Applied Sciences · 20.04.2026 · 16 (8) · 3988
DOI: 10.3390/app16083988 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 20.04.2026. Verfasst von Risheng Long und 5 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Liaoning Province, China, Scientific Research Fund of Liaoning Provincial Education Department, China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Rolling bearings operate under complex contact conditions, and their tribological and dynamic behaviors are highly sensitive to their lubrication performance. Based on previous studies on surface texturing, three types of representative textures (wholly distributed dimples, locally distributed dimples, and grooves) with optimized parameters were fabricated on the shaft washers using the laser marking method. This was done to investigate the synergistic effect of surface textures and polytetrafluoroethylene (PTFE) nano-additives on the tribological and friction-induced vibration performance of cylindrical roller thrust bearings under starved lubrication. Lubricating oils containing various mass fractions (0.5 wt%, 1.0 wt%, and 3.0 wt%) of PTFE nano-additives were prepared and employed. The coefficients of friction (COFs), wear losses, worn morphologies, and time/frequency-domain vibration responses were analyzed. The results show that the appropriate integration of surface textures and solid lubricant additives can establish a highly effective synergy for rolling bearings under starved lubrication. PTFE nano-additives significantly improved the tribological performance of the smooth bearings and those with dimples (both wholly distributed and locally distributed), with the optimal performance observed at a mass fraction of 3.0 wt%. In contrast, the tribological performance of the groove-textured bearings noticeably deteriorated with the addition of PTFE nano-particles, especially at higher mass fractions. The bearing with wholly distributed dimples exhibited the best overall tribological performance at a mass fraction of 3.0 wt%, achieving a 61.8% reduction in the average COF, a 99.6% reduction in wear loss, and significantly suppressed vibration amplitudes.
Förderung
- Natural Science Foundation of Liaoning Province, China
- Scientific Research Fund of Liaoning Provincial Education Department, China
- National Natural Science Foundation of China
- National Natural Science Foundation of China Young Scientist Fund
- University-level Doctoral Special Research Start-up Fund Support Project
Zitieren
APA
Long, R., Gao, F., Huang, R., Gao, S., Huang, W., & Zong, L. (2026). Synergism of PTFE Nano-Particles and Surface Textures on the Tribological Performance of Cylindrical Roller Thrust Bearings Under Starved Lubrication. Applied Sciences, 16(8), 3988. https://doi.org/10.3390/app16083988
Vancouver
Long R, Gao F, Huang R, Gao S, Huang W, Zong L. Synergism of PTFE Nano-Particles and Surface Textures on the Tribological Performance of Cylindrical Roller Thrust Bearings Under Starved Lubrication. Applied Sciences. 2026;16(8):3988. doi:10.3390/app16083988
BibTeX
@article{Long2026,
author = {Long, Risheng and Gao, Fangfeng and Huang, Ruidan and Gao, Shuzhi and Huang, Weibo and Zong, Lin},
title = {Synergism of PTFE Nano-Particles and Surface Textures on the Tribological Performance of Cylindrical Roller Thrust Bearings Under Starved Lubrication},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {8},
pages = {3988},
doi = {10.3390/app16083988}
}
EUVIMED