Study on the Loading Rate Effect of Mechanical-Energy Properties and Acoustic Emission Characteristics of Rock-like Materials
Applied Sciences · 16.04.2026 · 16 (8) · 3870
DOI: 10.3390/app16083870 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 16.04.2026. Verfasst von Fei Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Key Laboratory Special Programs of China Minmetals Corporation, Youth Science and Technology Fund of China Minmetals Corporation, National Key Research and Development Program of China.
Abstract (Originalsprache)
In goafs formed by underground mineral resource extraction, the remaining pillars are often subjected to uniaxial loading at different loading rates, and their mechanical responses and failure mechanisms directly affect the long-term stability of the goafs. This study uses rock-like materials to conduct uniaxial compression tests at loading rates ranging from 0.001 mm/min to 0.05 mm/min, combined with acoustic emission (AE) monitoring, to systematically investigate the effects of loading rate on the mechanical properties, energy distribution, constitutive model, and AE characteristics of the material. The results show that an increase in loading rate significantly enhances the stiffness and strength of the material, promotes a transition in failure mode from a shear–tension composite to tension-dominated, intensifies brittle characteristics, and simultaneously inhibits full crack development and fragments generation. In terms of energy evolution, an increased loading rate enhances the pre-peak total strain energy and elastic strain energy storage but reduces the efficiency of energy dissipation, leading to an intensified mismatch between energy storage and dissipation capacities at peak stress. A damage variable induced by loading rate was proposed, and a damage constitutive model considering the loading rate was established, with the theoretical curves showing good agreement with the experimental data. AE characteristic analysis further reveals that an increase in loading rate causes the crack type to transition from shear-dominated to tension-dominated, and the fluctuating increase in the b-value reflects a reduction in pre-peak fracture scale and a decrease in the degree of material fragmentation. The research findings are expected to deepen the understanding of the damage and failure mechanisms of rock materials under different loading rates, thereby laying a research foundation for the stability assessment of goaf pillars and disaster warning.
Förderung
- State Key Laboratory Special Programs of China Minmetals Corporation
- Youth Science and Technology Fund of China Minmetals Corporation
- National Key Research and Development Program of China
- China Postdoctoral Science Foundation
- Sichuan Science and Technology Program
Zitieren
APA
Li, F., Liu, C., He, Z., Yang, B., Luo, G., Ni, H., & Li, Y. (2026). Study on the Loading Rate Effect of Mechanical-Energy Properties and Acoustic Emission Characteristics of Rock-like Materials. Applied Sciences, 16(8), 3870. https://doi.org/10.3390/app16083870
Vancouver
Li F, Liu C, He Z, Yang B, Luo G, Ni H, et al. Study on the Loading Rate Effect of Mechanical-Energy Properties and Acoustic Emission Characteristics of Rock-like Materials. Applied Sciences. 2026;16(8):3870. doi:10.3390/app16083870
BibTeX
@article{Li2026,
author = {Li, Fei and Liu, Chang and He, Zhiqiang and Yang, Bengao and Luo, Gexuanzi and Ni, Huining and Li, Yilong},
title = {Study on the Loading Rate Effect of Mechanical-Energy Properties and Acoustic Emission Characteristics of Rock-like Materials},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {8},
pages = {3870},
doi = {10.3390/app16083870}
}
EUVIMED