EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advanced Process Chain for Manufacturing Individual 3D-Printed Insoles for Patients with Diabetic Foot Syndrome

Judith Osterloh, Danny Vogel, Franziska Knaack, Martin Behrens, Franziska Geiger, Volker Weißmann, Rainer Bader, Maeruan Kebbach

Applied Sciences · 13.04.2026 · 16 (8) · 3792

DOI: 10.3390/app16083792 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 13.04.2026. Verfasst von Judith Osterloh und 7 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VDI/VDE Innovation + Technik GmbH (Zentralen Innovationsprogramm Mittelstand.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of diabetic insoles is crucial for preventing and rehabilitating foot ulcers associated with diabetic foot syndrome. However, conventional insole manufacturing is often expensive, labour-intensive, and requires specialised expertise. Therefore, an advanced, partly automated manufacturing process chain for individualised 3D-printed insoles was developed, combining techniques such as 3D-scanning and additive manufacturing for diabetic patients. After scanning both feet, a virtual insole was loaded from a data library in the software, which automatically suggested the appropriate size and adjusted the heel support based on the plantar pressure distribution of the foot. The template of the individual insole was manually adjusted and the final insole was manufactured using a 3D-printer. A feasibility study was conducted involving five patients with diabetic polyneuropathic foot syndrome to compare the conventionally manufactured and 3D-printed insoles regarding the plantar pressure distribution, spatiotemporal gait parameters, and subjective comfort. The 3D-printed insoles showed a partially improved plantar pressure distribution in the descriptive analysis and only a slightly higher peak plantar pressure (n = 4; standing 2.0%, d = 0.09; walking 14.5%, d = 1.08). Marginally reduced gait velocity (n = 5, 14.0%, d = 0.40) was observed with the 3D-printed insoles, whereas the step length (n = 5, 2.5%, d = 0.18) remained similar for both insoles. No differences in the overall wearing comfort (n = 5, d = 0.16) were observed. In conclusion, the proposed process chain was feasible and the 3D-printed insoles showed indications of functional comparability to conventionally manufactured insoles. Therefore, they may represent a promising alternative for diabetic patients. However, larger comparative studies are required to confirm our findings.

Förderung

  • VDI/VDE Innovation + Technik GmbH (Zentralen Innovationsprogramm Mittelstand

Zitieren

APA

Osterloh, J., Vogel, D., Knaack, F., Behrens, M., Geiger, F., Weißmann, V., Bader, R., & Kebbach, M. (2026). Advanced Process Chain for Manufacturing Individual 3D-Printed Insoles for Patients with Diabetic Foot Syndrome. Applied Sciences, 16(8), 3792. https://doi.org/10.3390/app16083792

Vancouver

Osterloh J, Vogel D, Knaack F, Behrens M, Geiger F, Weißmann V, et al. Advanced Process Chain for Manufacturing Individual 3D-Printed Insoles for Patients with Diabetic Foot Syndrome. Applied Sciences. 2026;16(8):3792. doi:10.3390/app16083792

BibTeX
@article{Osterloh2026,
  author = {Osterloh, Judith and Vogel, Danny and Knaack, Franziska and Behrens, Martin and Geiger, Franziska and Weißmann, Volker and Bader, Rainer and Kebbach, Maeruan},
  title = {Advanced Process Chain for Manufacturing Individual 3D-Printed Insoles for Patients with Diabetic Foot Syndrome},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {3792},
  doi = {10.3390/app16083792}
}
Kostenlos starten →