EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CrystalCells: An Open-Source Modular Bioprinting Platform with Automated Tool Exchange, High-Performance Extruding, Thermal Control, and Microscopic Imaging

Shuang Liang, Silas Habimana, Feiyang Zheng

Applied Sciences · 10.04.2026 · 16 (8) · 3727

DOI: 10.3390/app16083727 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 10.04.2026. Verfasst von Shuang Liang und 2 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kyushu University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Open-source bioprinting can broaden access to biofabrication, enabling existing systems to perform high-resolution tissue manufacturing. However, most of these focus on low cost, easy assembly, or specific biomaterial ink rather than making a robust standardized and modularized multifunction platform. In this study, we present CrystalCells, a user-friendly modular open-source bioprinting system centered on the TridentExtruder, a high-performance syringe extruder with extrusion/retraction capability and tool-free automated syringe coupling. The system enables the automated exchange of syringe, temperature-controlling, microscope, and pipette modules. Repeated syringe return-and-pickup cycles showed repositioning errors within ±20 μm, while the extruder generated pressures above 950 kPa and exhibited lower elastic deformation than the Replistruder 4 under the same pressure conditions. CrystalCells supported the extrusion of pre-crosslinked alginate, FRESH printing, and dual-biomaterial inks printing with automated exchange. A microscope module resolved stained HeLa cells and enabled layer-by-layer imaging for defect detection during printing. A thermoelectric module maintained the syringe barrel below 6 °C during the printing of an alginate–collagen biomaterial ink at 23 °C (room temperature), and a pipette module transferred 2–10 μL volumes with errors within ±0.5 μL. These results show that CrystalCells is an open-source modular biofabrication platform integrating printing, imaging, temperature control, and liquid handling within a single workflow.

Förderung

  • Kyushu University

Zitieren

APA

Liang, S., Habimana, S., & Zheng, F. (2026). CrystalCells: An Open-Source Modular Bioprinting Platform with Automated Tool Exchange, High-Performance Extruding, Thermal Control, and Microscopic Imaging. Applied Sciences, 16(8), 3727. https://doi.org/10.3390/app16083727

Vancouver

Liang S, Habimana S, Zheng F. CrystalCells: An Open-Source Modular Bioprinting Platform with Automated Tool Exchange, High-Performance Extruding, Thermal Control, and Microscopic Imaging. Applied Sciences. 2026;16(8):3727. doi:10.3390/app16083727

BibTeX
@article{Liang2026,
  author = {Liang, Shuang and Habimana, Silas and Zheng, Feiyang},
  title = {CrystalCells: An Open-Source Modular Bioprinting Platform with Automated Tool Exchange, High-Performance Extruding, Thermal Control, and Microscopic Imaging},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {3727},
  doi = {10.3390/app16083727}
}
Kostenlos starten →