In-Situ Infrared Camera Monitoring for Defect and Anomaly Detection in Laser Powder Bed Fusion: Calibration, Data Mapping, and Feature Extraction
Applied Sciences · 31.03.2026 · 16 (7) · 3378
DOI: 10.3390/app16073378 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 31.03.2026. Verfasst von Shawn Hinnebusch und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of the Navy, Office of Naval Research https://ror.org/01awap711, Nuclear Regulatory Commission.
Abstract (Originalsprache)
Laser powder bed fusion (LPBF) is susceptible to defects arising from melt pool instabilities, spatter, heat accumulation, and powder spreading anomalies. In situ infrared (IR) monitoring can detect these issues; however, it typically generates large volumes of data that are costly to store and analyze. This work proposes a projection-based framework that directly maps in situ thermal measurements onto a three-dimensional (3D) voxelized part geometry, substantially reducing storage requirements while preserving spatial fidelity. In addition, several IR derived features are incorporated into a practical workflow for defect detection and process model calibration, including laser scan order, local pre-deposition temperature, maximum pre-scan temperature, and spatter generation and landing locations. For completeness, commonly used metrics such as interpass temperature, heat intensity, cooling rate, and relative melt pool area are extracted within the same unified processing pipeline. All features are computed using a consistent, reproducible Python-based implementation to streamline integration into routine monitoring and analysis tasks. Multiple parts are fabricated, monitored, and characterized to evaluate the proposed framework, demonstrating that the extracted features reliably identify process anomalies and correlate with observed defects.
Förderung
- Department of the Navy, Office of Naval Research https://ror.org/01awap711
- Nuclear Regulatory Commission
Zitieren
APA
Hinnebusch, S., Anderson, D., Bostan, B., & To, A. C. (2026). In-Situ Infrared Camera Monitoring for Defect and Anomaly Detection in Laser Powder Bed Fusion: Calibration, Data Mapping, and Feature Extraction. Applied Sciences, 16(7), 3378. https://doi.org/10.3390/app16073378
Vancouver
Hinnebusch S, Anderson D, Bostan B, To AC. In-Situ Infrared Camera Monitoring for Defect and Anomaly Detection in Laser Powder Bed Fusion: Calibration, Data Mapping, and Feature Extraction. Applied Sciences. 2026;16(7):3378. doi:10.3390/app16073378
BibTeX
@article{Hinnebusch2026,
author = {Hinnebusch, Shawn and Anderson, David and Bostan, Berkay and To, Albert C.},
title = {In-Situ Infrared Camera Monitoring for Defect and Anomaly Detection in Laser Powder Bed Fusion: Calibration, Data Mapping, and Feature Extraction},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {7},
pages = {3378},
doi = {10.3390/app16073378}
}
EUVIMED