A Cross-Layer Command-to-Trajectory Planning Framework for Geosynchronous Transfer Orbit–Geostationary Earth Orbit Transfer with an Electric-Propulsion Vectoring Arm
Applied Sciences · 25.03.2026 · 16 (7) · 3170
DOI: 10.3390/app16073170 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 25.03.2026. Verfasst von Songchao Wang und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Electric-propulsion (EP) orbit raising from geosynchronous transfer orbit (GTO) to geostationary Earth orbit (GEO) requires long-duration, continuously steered low thrust, for which small pointing deviations may accumulate over time, and practical execution is constrained by spacecraft attitude and momentum management. This study develops a cross-layer command-to-execution framework that couples mission-level thrust-command generation with smooth trajectory planning of an EP vectoring arm. At the orbit layer, an engineering-oriented mission-level transfer model with dominant J2 secular correction is used to construct a time-tagged sequence of thrust magnitude and direction commands for the GTO–GEO transfer. At the execution layer, a 4-DOF revolute arm is modeled using Denavit–Hartenberg kinematics, and the desired thrust directions are mapped to feasible joint trajectories through a direction-only inverse-kinematics formulation cast as a constrained nonlinear least-squares problem with cross/dot residuals, smoothness regularization, and warm-start propagation. In numerical simulation, the GTO–GEO transfer is completed in approximately 278 days with Δv ≈ 3665 m/s, corresponding to a propellant consumption of 175 kg (spacecraft mass from 1800 kg to 1625 kg). The planned joint trajectories remain smooth over the full horizon, with maximum inter-sample variations of 1.84° and 1.04° for the major and minor motion groups, respectively. The numerical geometric thrust-direction tracking error in the kinematic mapping remains at the millidegree level, with a mean of 7.39 × 10−4° and a P95 of 0.00101°. The results demonstrate that the proposed cross-layer interface can generate executable, low-bandwidth joint commands while preserving high geometric consistency with the desired thrust directions in the numerical kinematic mapping sense, thereby providing a practical basis for implementation-oriented studies of EP orbit transfer with vectoring manipulators.
Zitieren
APA
Wang, S., Zhang, Y., Wang, J., Chen, J., & Wang, J. (2026). A Cross-Layer Command-to-Trajectory Planning Framework for Geosynchronous Transfer Orbit–Geostationary Earth Orbit Transfer with an Electric-Propulsion Vectoring Arm. Applied Sciences, 16(7), 3170. https://doi.org/10.3390/app16073170
Vancouver
Wang S, Zhang Y, Wang J, Chen J, Wang J. A Cross-Layer Command-to-Trajectory Planning Framework for Geosynchronous Transfer Orbit–Geostationary Earth Orbit Transfer with an Electric-Propulsion Vectoring Arm. Applied Sciences. 2026;16(7):3170. doi:10.3390/app16073170
BibTeX
@article{Wang2026,
author = {Wang, Songchao and Zhang, Yexin and Wang, Jian and Chen, Jinbao and Wang, Jianyuan},
title = {A Cross-Layer Command-to-Trajectory Planning Framework for Geosynchronous Transfer Orbit–Geostationary Earth Orbit Transfer with an Electric-Propulsion Vectoring Arm},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {7},
pages = {3170},
doi = {10.3390/app16073170}
}
EUVIMED