EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tolerance Based Thermo-Optical Risk Framework for Parabolic Trough Collectors Under Receiver Misalignment

Fatih Ünal, Nesrin İlgin Beyazit, Merve Şentürk Acar

Applied Sciences · 25.03.2026 · 16 (7) · 3168

DOI: 10.3390/app16073168 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 25.03.2026. Verfasst von Fatih Ünal und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Parabolic trough collectors (PTCs) are highly sensitive to receiver positioning accuracy; however, most existing studies report optical efficiency degradation without formally defining alignment tolerance limits. This study proposes a tolerance-based thermo-optical risk framework to quantify allowable receiver misalignment envelopes for reliable PTC operation. A Monte Carlo Ray Tracing (MCRT) methodology is employed to evaluate the impact of angular receiver misalignment on optical efficiency and circumferential heat flux redistribution. Beyond conventional efficiency metrics, normalized flux-based thermal non-uniformity indicators are introduced to assess thermo-mechanical risk without requiring full thermo-fluid modeling. The results reveal a nonlinear decoupling between optical acceptability and thermal safety. While optical efficiency remains above 0.80 up to approximately ±6°, pronounced flux localization and rapid growth of thermal stress indicators occur beyond ±4°, marking the onset of thermally critical behavior. The identified ±4° threshold corresponds to approximately twice the collector half-acceptance angle (θ(crit)/δ ≈ 2), demonstrating geometry-dependent scaling characteristics. The proposed framework formalizes the optical–thermal decoupling phenomenon and transforms conventional efficiency-based evaluation into a reliability-informed alignment tolerance assessment tool applicable to manufacturing precision, installation control, and operational quality management in CSP systems.

Zitieren

APA

Ünal, F., Beyazit, N. İ., & Acar, M. Ş. (2026). Tolerance Based Thermo-Optical Risk Framework for Parabolic Trough Collectors Under Receiver Misalignment. Applied Sciences, 16(7), 3168. https://doi.org/10.3390/app16073168

Vancouver

Ünal F, Beyazit Nİ, Acar MŞ. Tolerance Based Thermo-Optical Risk Framework for Parabolic Trough Collectors Under Receiver Misalignment. Applied Sciences. 2026;16(7):3168. doi:10.3390/app16073168

BibTeX
@article{nal2026,
  author = {Ünal, Fatih and Beyazit, Nesrin İlgin and Acar, Merve Şentürk},
  title = {Tolerance Based Thermo-Optical Risk Framework for Parabolic Trough Collectors Under Receiver Misalignment},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {3168},
  doi = {10.3390/app16073168}
}
Kostenlos starten →