EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser Surface Microtexturing for Enhanced Adhesive Bonding in Steel–Polymer and Steel–Ceramic Joints

Szymon Tofil, Leonardo Orazi, Vincenzina Siciliani, Cyril Mauclair, António B. Pereira, Sascha Stribick, Felix Hartmann, Jianhua Yao, Qunli Zhang, Liang Wang, Shuyang Lin

Applied Sciences · 20.03.2026 · 16 (6) · 3010

DOI: 10.3390/app16063010 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 20.03.2026. Verfasst von Szymon Tofil und 10 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Centre for Research and Development.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser surface microtexturing has emerged as an effective approach for improving the performance of adhesive joints between dissimilar materials. In this study, the influence of laser-generated micrometric surface features on the mechanical behavior of hybrid adhesive joints was investigated for two material systems: structural steel bonded to polyamide (PA66) and structural steel bonded to technical ceramic (Al2O3). Single-lap joints were manufactured using a two-component epoxy adhesive with two nominal bond-line thicknesses (0.1 mm and 1.0 mm). Prior to bonding, selected surfaces were modified by ultrashort-pulse laser microtexturing, producing well-defined circular features with characteristic depths on the order of tens of micrometers. The resulting microstructures were characterized using optical and scanning electron microscopy, and their geometric parameters were quantified through profilometric measurements. Mechanical performance was evaluated under shear and bending loading conditions. The results demonstrate a substantial increase in joint strength for laser-microtextured surfaces compared with non-textured references for both material combinations. The effect of surface microtexturing was more pronounced than the influence of adhesive layer thickness within the investigated range. These findings confirm that laser-induced surface microtexturing is a versatile and application-oriented surface preparation method capable of enhancing the reliability of adhesive bonding in hybrid metal–polymer and metal–ceramic assemblies.

Förderung

  • National Centre for Research and Development

Zitieren

APA

Tofil, S., Orazi, L., Siciliani, V., Mauclair, C., Pereira, A. B., Stribick, S., Hartmann, F., Yao, J., Zhang, Q., Wang, L., & Lin, S. (2026). Laser Surface Microtexturing for Enhanced Adhesive Bonding in Steel–Polymer and Steel–Ceramic Joints. Applied Sciences, 16(6), 3010. https://doi.org/10.3390/app16063010

Vancouver

Tofil S, Orazi L, Siciliani V, Mauclair C, Pereira AB, Stribick S, et al. Laser Surface Microtexturing for Enhanced Adhesive Bonding in Steel–Polymer and Steel–Ceramic Joints. Applied Sciences. 2026;16(6):3010. doi:10.3390/app16063010

BibTeX
@article{Tofil2026,
  author = {Tofil, Szymon and Orazi, Leonardo and Siciliani, Vincenzina and Mauclair, Cyril and Pereira, António B. and Stribick, Sascha and Hartmann, Felix and Yao, Jianhua and Zhang, Qunli and Wang, Liang and Lin, Shuyang},
  title = {Laser Surface Microtexturing for Enhanced Adhesive Bonding in Steel–Polymer and Steel–Ceramic Joints},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {3010},
  doi = {10.3390/app16063010}
}
Kostenlos starten →