EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hardware System and Preliminary Testing of Frequency Division Multiplexing Electrical Resistivity Tomography(FDM-ERT) Instrument

Donghai Yu, Rujun Chen, Chunming Liu, Ruijie Shen, Shaoheng Chun, Zhitong Liu, Kai Yu

Applied Sciences · 18.03.2026 · 16 (6) · 2935

DOI: 10.3390/app16062935 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 18.03.2026. Verfasst von Donghai Yu und 6 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deep Earth Probe and Mineral Resources Exploration-National Science and Technology Major Project, Guangzhou Construction Group Science and Technology Plan Project, School-level Natural Science Research and Innovation Team Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Addressing the low efficiency associated with single-frequency serial acquisition in urban exploration using traditional electrical resistivity tomography (ERT) instruments, this study introduces a Frequency Division Multiplexing Electrical Resistivity Tomography (FDM-ERT) method and hardware system. By utilizing transmission modules that simultaneously output AC excitation signals at distinct frequencies, coupled with receiver modules that enable multi-channel parallel acquisition and data transmission, the system achieves a “one-time layout, multi-frequency synchronous measurement” workflow. Laboratory tests under controlled conditions and preliminary field tests conducted at the Xiangjiang River beach demonstrate that this method maintains relatively high consistency with traditional single-frequency measurements. The relative error of apparent resistivity across frequency points remains below 2%, with an inversion root mean square error (RMSE) of 0.4%. Furthermore, the multi-frequency synchronous mode reduces total measurement time by approximately 66.7%. While these results were obtained in relatively controlled environments, they substantiate the core feasibility of the FDM-ERT system for multi-frequency synchronous measurement, providing a certain hardware foundation for subsequent validation and optimization in complex, real-world urban settings.

Förderung

  • Deep Earth Probe and Mineral Resources Exploration-National Science and Technology Major Project
  • Guangzhou Construction Group Science and Technology Plan Project
  • School-level Natural Science Research and Innovation Team Project
  • Jiangsu Province Higher Education Basic Science (Natural Science) Research General Project
  • Jiangsu Province “Shuangchuang doctor” Program
  • Jiangsu Province University Science and Technology Innovation Team Project

Zitieren

APA

Yu, D., Chen, R., Liu, C., Shen, R., Chun, S., Liu, Z., & Yu, K. (2026). Hardware System and Preliminary Testing of Frequency Division Multiplexing Electrical Resistivity Tomography(FDM-ERT) Instrument. Applied Sciences, 16(6), 2935. https://doi.org/10.3390/app16062935

Vancouver

Yu D, Chen R, Liu C, Shen R, Chun S, Liu Z, et al. Hardware System and Preliminary Testing of Frequency Division Multiplexing Electrical Resistivity Tomography(FDM-ERT) Instrument. Applied Sciences. 2026;16(6):2935. doi:10.3390/app16062935

BibTeX
@article{Yu2026,
  author = {Yu, Donghai and Chen, Rujun and Liu, Chunming and Shen, Ruijie and Chun, Shaoheng and Liu, Zhitong and Yu, Kai},
  title = {Hardware System and Preliminary Testing of Frequency Division Multiplexing Electrical Resistivity Tomography(FDM-ERT) Instrument},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {2935},
  doi = {10.3390/app16062935}
}
Kostenlos starten →