Comparative Study on Helium Ion Irradiation Resistance in Additively Manufactured 316L Stainless Steel and CoCrFeNi High-Entropy Alloy
Applied Sciences · 13.03.2026 · 16 (6) · 2750
DOI: 10.3390/app16062750 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 13.03.2026. Verfasst von Som Dixit und 4 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. National Science Foundation, EPSCoR Research Infrastructure Improvement.
Abstract (Originalsprache)
The 316L stainless steel (316L SS) and high-entropy alloys (HEAs) are leading candidates for radiation-tolerant structural materials in nuclear environments. Additive manufacturing (AM) enables tailored microstructures through unique thermal histories, producing high dislocation densities and sub-grain features that act as effective sinks for irradiation-induced defects. In this work, a direct quantitative comparison of helium (He) irradiation response, particularly bubble formation, is conducted between 316L SS fabricated using laser powder bed fusion (LPBF) and CoCrFeNi HEAs fabricated by laser-directed energy deposition (LDED), both possessing a face-centered cubic (FCC) crystal structure and comparable principal elemental constituents. The samples were subjected to ex situ He ion irradiation using 200 keV He+ ions to a peak damage dose of 10 dpa at 25 °C, 400 °C, and 600 °C at the CINT User Facility at Los Alamos National Laboratory. Post-irradiation microstructural characterization was performed using transmission electron microscopy at the IVEM-Tandem Facility at Argonne National Laboratory. For LPBF 316L SS, the areal bubble density decreases from approximately 5.1 × 104 µm−2 at 25 °C to 2.1 × 103 µm−2 at 600 °C, while the mean bubble diameter increases from 2.9 nm to 37.4 nm. The CoCrFeNi HEA exhibits a similar trend but retains a higher areal bubble density at elevated temperatures, with values of 2.1 × 104 µm−2 at 400 °C and 3.7 × 103 µm−2 at 600 °C, along with a larger mean bubble size at 400 °C compared to 316L SS. These results highlight the combined roles of AM-induced microstructures, alloy compositions, and irradiation temperatures in governing He damage evolution in FCC alloys, providing guidance for the development of radiation-tolerant materials for advanced nuclear energy applications.
Förderung
- U.S. National Science Foundation, EPSCoR Research Infrastructure Improvement
Zitieren
APA
Dixit, S., Li, J., Wang, Y., Chen, W., & Liu, S. (2026). Comparative Study on Helium Ion Irradiation Resistance in Additively Manufactured 316L Stainless Steel and CoCrFeNi High-Entropy Alloy. Applied Sciences, 16(6), 2750. https://doi.org/10.3390/app16062750
Vancouver
Dixit S, Li J, Wang Y, Chen W, Liu S. Comparative Study on Helium Ion Irradiation Resistance in Additively Manufactured 316L Stainless Steel and CoCrFeNi High-Entropy Alloy. Applied Sciences. 2026;16(6):2750. doi:10.3390/app16062750
BibTeX
@article{Dixit2026,
author = {Dixit, Som and Li, Jiaxuan and Wang, Yongqiang and Chen, Wei-Ying and Liu, Shunyu},
title = {Comparative Study on Helium Ion Irradiation Resistance in Additively Manufactured 316L Stainless Steel and CoCrFeNi High-Entropy Alloy},
journal = {Applied Sciences},
year = {2026},
volume = {16},
number = {6},
pages = {2750},
doi = {10.3390/app16062750}
}
EUVIMED